Side (Wideside® Transducer: Wideside® View Only); Sensitivity - Humminbird 778c HD Operation Manual

700 series

Hide thumbs Also See for 778c HD:

Table of Contents

Side sets which transducer beam from the WideSide® Transducer will be

shown in the WideSide® View.

The Side menu option is available when a WideSide® transducer is connected

to the Fishing System and Transducer Select is set to WideSide® (see Sonar

Menu Tab: Transducer Select). This option can only be accessed from the

Sonar X-Press™ menu in the WideSide® view.

NOTE: The Side setting requires the purchase of the WideSide® transducer. Visit

our Web site at humminbird.com to order this accessory online or contact our

Customer Resource Center at 1-800-633-1468.

Sensitivity controls how much detail is shown on the display and will adjust

the sensitivity of all sonar frequencies.

When operating in very clear water or greater depths, increase the sensitivity

to see weaker returns that may be of interest. If the sensitivity is adjusted too

high, the display may become too cluttered.

Decrease the sensitivity to eliminate the clutter from the display that is

sometimes present in murky or muddy water. If Sensitivity is adjusted too low,

the display may not show many sonar returns that could be fish.

NOTE: The Sensitivity setting is a global setting and will adjust the sensitivity

of all sonar frequencies.

Sensitivity at Low

Side

(WideSide® transducer: WideSide® View only)

Settings: Left, Both, Right; Default = Both

Settings: Low = 1, High = 20; Default = 10

Sensitivity at Medium

Sensitivity at High

Sonar X-Press™ Menu

Table of Contents