Lifting And Moving The Tv; Setting Up The Tv; Using The Joystick Button; Basic Functions - LG 24MT57DC Owner's Manual

• The items supplied with your product may vary depending on the
model.
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width.
• Use an extension cable that supports USB 2.0 if the USB cable or
USB memory stick does not fit into your TV's USB port.
B
A
*A 10 mm
*B 18 mm
• Use a certified cable with the HDMI logo attached. If you do
not use a certified HDMI cable, the screen may not display or a
connection error may occur.
• Recommended HDMI cable types
- High-Speed HDMI®/™ cable
- High-Speed HDMI®/™ cable with Ethernet
CAUTION
• Do not use any unapproved items to ensure the safety and product
lifespan of the product.
• Any damages or injuries by using unapproved items are not
covered by the manufacturer's warranty.
• Some models have a thin film attached on to the screen and this
must not be removed.

Lifting and moving the TV

Please note the following advice to prevent the TV from being
scratched or damaged and for safe transportation regardless of its
type and size.
• It is recommended to move the TV in the box or packing material
that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and
all cables.
• When holding the TV, the screen should face
away from you to avoid damage.
• Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grille area.
• When transporting the TV, do not expose the TV to jolts or
• When transporting the TV, keep the TV upright; never turn the TV
• Do not apply excessive pressure to cause flexing /bending of frame
• Avoid touching the screen at all times, as this may result in
B
• When handling the TV, be careful not to damage the protruding
A

Setting up the TV

• Do not carry the TV upside-down by holding the stand body (or
• When attaching the stand to the TV set, place the screen facing
• Remove the stand before installing the TV on a wall mount by
• Lift up the latch at the bottom of the stand base and detach the

Using the joystick button

You can simply operate the TV functions, pressing or moving the
joystick button up, down, left or right.
• Image shown may differ from your TV.

Basic functions

excessive vibration.
on its side or tilt towards the left or right.
chassis as it may damage screen.
CAUTION
damage to the screen.
joystick button.
CAUTION
stand base) as this may cause it to fall off, resulting in damage
or injury.
down on a cushioned table or flat surface to protect the screen
from scratches.
NOTE
performing the stand attachment in reverse. (Only MT57D)
stand base from the TV. (Only MT47*, MT57DC)
Joystick button
When the TV is turned off, place
Power On
your finger on the joystick button
and press it once and release it.
When the TV is turned on, place
your finger on the joystick button,
press it once for a few seconds
and release it. (However, if the
Power Off
menu button is on the screen,
pressing and holding the joystick
button will let you exit the
menu.)
7