Samsung SP-A800B Owner's Instructions Manual page 10

Power Cable
LED Indications
●:Light is On ◐:Light is Blinking
TEMP LAMP STAND BY
○ ○ ●
○ ● ●
○ ◐ ●
○ ◐ ○
◐ ○ ◐
◐ ◐ ○
◐ ○ ○
◐ ◐ ●
◐ ◐ ◐
● ◐ ●
○ ◐ ◐
● ◐ ◐
◐ ● ◐
Clearing Indicator Problems
Classification State
When the cooling fan
Action 1 system is not in normal
operating condition.
When the lamp cover
protecting the lamp unit is
not properly closed or the
Action 2
sensor system is not in
normal operating
condition.
Remote Control/ 2 Batteries
○:Light is Off
If you press the POWER button on the remote control or projector, the screen
appears within 30 seconds.
The projector is in normal operating condition.
This state appears when the projector is preparing an operation after the POWER button
on the projector or the remote control has been pressed.
The POWER button is pressed to turn off the projector, and the cooling system is in
operation to cool off inside of the projector. (Lasts for about 1 minute and 30 seconds)
Refer to Action 1 below if the cooling fan inside the projector is not in normal operation
condition.
Refer to Action 2 below if the lamp cover protecting the lamp unit is not closed
properly.
Power is turned off automatically when temperature inside of the projector goes beyond
the control limit. Refer to Action 3.
A problem has occurred when operating the DDP IC in the product. Refer to Action 4.
A problem has occurred with the operation of the lamp. Refer to Action 5.
The lifetime of the lamp has expired. Refer to Action 6.
The memory in the product is not operating normally. Contact a
The power for the product is not operating normally. Contact a
A problem has occurred when operating the color wheel in the product. Refer to Action
4.
If the symptom remains even after disconnecting and then
reconnecting the power cord and turning the projector on again,
contact your product provider or our
Check whether the screws at the bottom side of the projector are
fastened correctly. If they are abnormally fastened, contact your
product distributor or
Adjust the installation state of your projector by referring to the
Cleaning Cloth
Information
service
service
Measures
service center.
service center.
center.
center.