INTRODUCTION CANON POWERSHOT G12 Waterproof Housing WHC-G12 ※ Thank you for purchasing the WHC-G12 Waterproof Housing. To ensure proper and safe use, please thoroughly read this manual. ※ Improper use may cause leakage causing irreparable damage to your digital camera.
Page 3
・ O -Ring Grease ・ OPTIONS The following items are optional. Please contact Recsea or your local dealer if you wish to purchase. O riginal 2 and 3 piece Close Up Lens Set ・ L ens Mount adapter (for ST/M67/28AD) ・...
Page 4
ISO/Mode Double Dial The ISO Dial is on the bottom with Mode Dial on top. When pressure is placed on the ISO Dial and turned, both housing dials will turn but only the camera's ISO Dial setting will be manipulated. When pressure is placed on the Mode Dial, only the Mode Dial will turn. If due to underwater pressure the Mode Dial setting is manipulated when setting ISO: Apply pressure only to the ISO and turn to desired setting.
Page 5
lens and port. Strobe Mask/External Strobe Connection Mount Screw Hole For External Strobe, use External Strobe Connection Mount. Port Lock Button Use when removing the port. While pressing the Port Lock Button, rotate Lens Port clockwise until it stops. Please refer to camera manual for explanation of button functions. ※...
※ installation. Please conduct the following operations in a clean area with low humidity and dust. ※ Recsea Housings can be used with various Lens Ports and Port Converters compatible ※ with a variety of lenses. NOTE: Lens Port cannot be installed with External Strobe Connection Mount and Strobe...
Mask attached. Please remover first. CAUTION! Only use the proper Lens Port intended for each lens. Failure to use the proper Lens Port could result in image vignetting and distortion, as well as possible water leakage. 1. Prepare the appropriate Lens Port for the lens to be used. 2.
The Lens is manufactured using hard coat acrylic. When cleaning please take care not to ※ scratch it. Should the Lens become scratched please send port to Seatool/Recsea for replacement. (Repair fee and return shipping will be charged at normal rates)
Page 9
CONSUMABLE PARTS For replacement of consumable parts such as O-Rings please contact your dealer or ※ Recsea. LIGHT/STROBE INSTALLATION The Accessory Shoe on top of the housing can be used for installation of a target light. Please be mindful of the weight of the light(s) you intend to use. For heavy lights and strobes please use optional Tray Grip.
Page 10
Warranty does not cover any losses resulting from inoperability of this product, including ※ those related to lost profits or any related expenses. Recsea will stock parts necessary for repair for five (5) years from stop of production. ※ ※...
D ealer: Stamp your company name and contact information, purchase date, model and serial ※ number. Seatool/Recsea Manufacturing & Sales NTF CORPORATION UH Division 390-1 Mii, Midori-Ku, Sagamihara-Shi Kanagawa 252-0151, Japan T: +81 (0)50-7541-0294 F: +81 (0)42-780-5720 http://www.seatool.net E-mail: info@seatool.net...