Subscribe to Our Youtube Channel
Related Manuals for Paperfox H-1
Summary of Contents for Paperfox H-1
- Page 1 Paperfox H-1 Cylinder cutting machine Operational manual V 1.1-en PAPERFOX – cutting, punching, folding www.paperfox.eu...
- Page 2 Paperfox H-2142 Nagytarcsa, Tessedik S. u. 48. Cutting capacity The Paperfox H-1 cylinder cutting machine is designed only for cutting sheet material specified in parameters. You can cut simple shapes (for example a single circle or a rectangle) from card up to 1000 g/m2 paper weight.
- Page 3 3. Handle 4. Machine frame Usage of the Paperfox H-1 cylinder cutting machine Place a VLPOM cutting plate or another hard plastic or metal plate on the machine table. Put the cutting tool on the cutting plate with the cutting edges up. This plate protects the soft machine table from be hurt by the back side of the cutting lines.
- Page 4 H-1 Cylinder cutting machine If the tool has parallel lines with the cylinder the place the tool angled on the table. In this way you can avoid the unnecessary stress in the machine which occurs when the machine has to cut a long line at once.
- Page 5 H-1 Cylinder cutting machine Test the cutting result and in small steps increase the cutting pressure with the setting screws until the machine cuts the whole shape perfectly. You can use the machine for cutting in booth direction, but you can achieve better accuracy if you use it always in the same direction.
Need help?
Do you have a question about the H-1 and is the answer not in the manual?
Questions and answers