Page 1
Please take the time to read through this manual to become acquainted with the AMT NG-1. The device IS NOT a copy of any known device. AMT engineers used their own technical ideas and their own approaches in solving the problem of noise suppression of the guitar signal.
Page 2
10- EXT.F - LED indicator. It is being used in a work with pedal board. 11- GATE ON - LED indicator of the device's. 12- Signal connector for work with the AMT BRICKS pedalboard. EXAMPLES OF NG-1 APPLICATION WITH DIFFERENT DEVICES 1.
Page 3
MADE IN RUSSIA OMSK 2018 2. Not recommended, but possible signal chains: NOTES * In case of use of spatial (time) effects in a guitar path with the noise suppression device (NG-1), it is recommended to place them after the NG-1, to prevent cutting of reverberation "tails". *If effective noise reduction is observed at the position of the knob THRESHOLD more than 12-13 hours, you should first pay attention to the shielding of the guitar and the grounding of the equipment, and then use the noise reduction device NG-1.