Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ELBOX BlackBOX 1200
- Page 1 BlackBOX 1200 THE TOWER CASE FOR AMIGA 1200 ASSEMBLY MANUAL ver.1.1 28 June 2017...
-
Page 2: Technical Specification
All the parts necessary for fixing a standard Amiga 1200 in the BlackBOX 1200 case are supplied. FEATURES BlackBOX 1200 is a modern functional and spacious tower case. It is designed for these Amiga 1200 users who want to upgrade their computers with Mediator PCI busboards. - Page 3 - C Bolt M3*5mm (for secure HDDs during transport) 4 pcs. ADDITIONAL ACCESSORIES FOR THE BlackBOX 1200 CASE (additional accessories for the BlackBOX 1200 case available on request) ➤ A PC WIN95 keyboard ➤ FastATA 1200 CF/SATA controller ➤ 4xEIDE buffered interface ➤...
- Page 4 Slightly screw down the ports at the back of Amiga with the twelve screws unscrewed earlier. Slightly screw down the Amiga board to the side wall of the BlackBOX 1200 case with one screw (round M3 head with a flange).
- Page 5 Install CF-to-PATA adapter on the 4 stand off located on the BlackBOX side wall nearest A1200 motherboard ALICE chip. Connect the device to the HDD ribbon. Thank you for choosing the BlackBOX 1200 case! All the parts necessary for fixing a standard Amiga 1200 in the BlackBOX 1200 case are supplied.
- Page 6 Put the POWER SW plug (at the end of a green-black wire which comes out from the front wall of the BlackBOX 1200 case) into the POWER SW jumper on the Mediator PCI 1200 TX/SX busboard or the into the POWER SW jumper on the ATX-to-AT adapter board.
- Page 7 ELBOX COMPUTER ul. Zabłocie 39 30-701 Kraków, Poland Tel: +48 570 470 002 Tel: +48 12 2630032 e-mail: info@elbox.com...
Need help?
Do you have a question about the BlackBOX 1200 and is the answer not in the manual?
Questions and answers