Eibach MULTI-PRO-R2 Installation Instructions Manual

MULTI-PRO-R2
Eibach Springs, Inc. | 256 Mariah Circle | Corona | California 92879-1751 | USA
T +1 951-256-8300
www.eibach.com
1997-01 Acura Integra, Type-R, DC2
PART NUMBER 4020.713
Part Number Description
A 4017.8300 DAMPER ASSY FRONT
B 4020.8400 DAMPER ASSY REAR
C UB0120 RESERVOIR CLAMP
C
NOTES: Read All Instructions Before Beginning Installation

Installation of a Eibach Multi-Pro Coil-Over set should only be performed by a qualified mechanic experienced in the
installation and removal of suspension components.

Use of a hoist is highly recommended and will substantially reduce installation time.

Never work on or under a vehicle unless it is properly supported by safety stands and wheels are blocked.

Never use impact wrenches or guns to install or remove shock absorber piston components, shafts and piston rod
nuts.

After installation, it is always important to inspect and adjust the following if necessary:
- Wheel alignment such as camber, caster & toe.
- Tire and/or wheel fender clearance.
- Brake line clearance and attachments.
- Brake anti-locking and anti-skid system sensors.

Alignment: After installation, you will need a full vehicle alignment to ensure proper tire wear and performance.

Height Adjustment – Should be performed with the wheels completely off the ground and with the springs fully
unloaded.
PERFORMANCE SUSPENSION
| INSTALLATION INSTRUCTIONS
PARTS & HARDWARE LIST
PARTS IDENTIFIER
A
F
Qty Part Number
2 D PDK4.TOOL
2 E PDK6.TOOL
2 F PDR.TOOL
E
D
D3157 - Page 1
AUTOMOTIVE OEM/OES
Description
4mm ADJUSTMENT TOOL
6mm ADJUSTMENT TOOL
REBOUND TOOL
Qty
1
1
1
B
HI-TECH INDUSTRIAL