Operation
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
English - 38
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select "Input".
2
Press the ENTER button to
select "Source List".
Press the ... or † button to
select a signal source, then
press the ENTER button.
• When you connect
equipment to the TV,
you can choose
between the following sets of jacks: "AV1", "AV2",
"S-VIDEO1", "S-VIDEO2", "COMPONENT1",
"COMPONENT2", or "HDMI/DVI" on the TV's rear
panel and "AV3" or "S-VIDEO3" on the TV's side panel.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
NOTES
• Before selecting an input source, connect an external device first.
• HDMI input can be selected only when the external device is
turned on and connected to the TV.
Input
Input
Source List
: TV
Edit Name
Picture
Anynet
Sound
Channel
Setup
Guide
Move
Enter
Source List
TV
Input
AV1
----
Picture
AV2
----
AV3
----
Sound
S-Video1
----
Channel
S-Video2
----
S-Video3
----
Setup
▼ More
Guide
Move
Enter
AV1
√
√
Return
Return