Table of Contents
Advertisement
Clearing Paper Jams
6
Replace the exit roller.
Make sure that you click the right
end of the roller back in place. If you
fail to do so, the printer system will
recognize that the printer cover is open
or that a system fuser error has
occurred, and the Error light on the
control panel will turn on.
7
Replace the stopper as shown, and close
the rear output tray.
8
To resume printing, open the top cover,
and then close it close it again.
Note:
If the Paper and the Error lights
do not turn off, there is still jammed
paper inside the printer. Check the input
area and the inside of the printer.
7.8
P
S
ROBLEM
OLVING
Advertisement
Table of Contents
Troubleshooting
