Cactus X2GO User Manual page 3

2. Product Activation & Installtion
Before using your CACTUS X2GO ensure that it is fully
charged. When it is fully charged, it will automatically
power on.
Detach the band: pull o the strap (on both sides) of the
device body.
1 2
The red indicator is
3 4
on during charging
Charge the battery: Insert the chip-mounted end of the
device body into the USB interface to activate the product
by charging (be cautious not to reverse the polarity, and to
comply with the required voltage and current: 5V /
500mA)
When inserted in the correct position to charge, a red light
will come on. When fully charged (battery image will show
full charge) attach both bands to the device.
You are now ready to wear the CACTUS X2GO – adjust the
length of the band and fasten the device around your
wrist.
02