Set Day And Time; Adjust Temperature (Temporary Hold) - ION SYST0101CW Owner's Manual

comfort. Your installing contractor is able to enable this feature, if desired. (This
feature is only available with zoned systems).
S If HEAT is selected then the Iont System Control operates only the
heating system.
S If COOL is selected then the Iont System Control operates only the
cooling system.
S If FAN ONLY is selected, then the Iont System Control operates the
indoor fan but heating, cooling, humidification or dehumidification will
not take place.

Set Day and Time

S To set the day and time for your home screen enter the Main Screen by
touching anywhere on the Control.
S Touch the DAY and TIME label located at the top middle of the screen
or access by going through the menu screen (see Pg. 37).
S To set the HOUR, MINUTE, MONTH, DAY, or YEAR touch the fea-
ture you wish to change.
S Use the Up (Y) and Down (B) buttons to make the appropriate
changes.
S When you have completed all of the settings, touch SAVE.
S If you make a mistake you may touch CANCEL and begin again.

Adjust Temperature (Temporary Hold)

The Iont System Control allows you to temporarily override your programmed
schedule by adjusting the indoor temperature at any time to meet your needs.
NOTE: The Iont System may seem slow to react to set point, activity and system
mode changes. This is normal, as the system will ramp up capacity and fan speeds
slowly to achieve the proper level of home conditioning, while avoiding wasting
energy, stressing home circuits and dimming lights with a "hard start."
6