If the wooden cabinet becomes dusty please wipe it with a soft, non-abrasive dust cloth. Also don’t use water or spray cleaners as this can damage the cabinet and the plastic/metal parts of the unit. TECHNICAL SPECIFICATION Turntable speed: 33/45/78 RPM (Disc size 17.5/25/30cm) •...
To close the lid. Pull forward the lid support bracket to release and then gently lower the lid. TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED. ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET. LOCATIONS OF CONTROLS AND INDICATORS Locations of Controls: 13.
Page 6
27. CASSETTE MECHANISM/TAPE STOP / EJ 33. PICK-UP HOLDER 28. FM ANTENNA 34.Auto-stop ON/OFF 29. AC CORD 35. 33/45/78 RPM SPEED SELECTOR 30. ON/OFF SWITCH 36.Tone needle 37.TURNTABLE 31. ADAPTOR 38.LINE OUT 32. TURNTABLE PAUSE SWITCH INFORMATION The AM antenna is inside the cabinet. IF AM reception is unsatisfactory try re-positioning the cabinet slightly until the internal antenna is picking up the strongest signal.
44. Turntable 45. 45 rpm adapter 46. Cue lever 47. Auto Stop control 48. Speed selector (33/45/78 rpm) 49. Tone arm lock 50. Tone arm with stylus POWER ON/OFF Press POWER to turn the system on. The power indicator lights up. Press the function selector buttons (AM/FM/CD/USB/TAPE/PHONO/AUX IN) to select the desired function.
Page 8
Make sure you connected the FM antenna cable on the rear side of the unit. Press MW button for AM or UKW button for FM radio. Rotate the TUNING control to tune the desired radio station, the FM ST/REC indicator will light.
Page 9
Insert your cassette into the slot located on the right side of the cabinet, as shown in the illustration, with the side you wish to play facing up and the open end on the right side. Cassette playback begins as soon as the tape is inserted. Adjust the VOLUME control to the desired level.
PLAYING VINYLS RECORDS The system includes a full-size, 3 speed, belt-drive turntable. You can play 33, 45 and 78rpm records. Press POWER to turn the system on. Press the PHONO button to enter the PHONO mode. Make sure you have removed the stylus cover from the stylus and have released the tone arm lock that secured the tone arm to the tone arm rest.
Insert a USB flash device into the USB socket. PLAY/PAUSE, DN/UP and stop functions are the same as CD functions. PLAYING IN MP3 MODE (CD/USB) Press PLAY/PAUSE button to start or pause playback selected track. While playing the song, the song number and folder number of the selected track will be shown in the display.
Page 12
Insert USB flash drive into the USB socket. Then press TAPE button. Place the cassette into the socket. Play cassette. Press RECORD button twice to start recording. Press STOP button to stop recording. Vinyl recording Insert USB flash drive into the USB socket. Then press PHONO/AUX IN button. Play the vinyl and press RECORD button twice to start recording.
Page 13
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen below.
Need help?
Do you have a question about the MCR-50MK3 and is the answer not in the manual?
Questions and answers