Biketronics Titan II Installation Manual

Step One: Mounting Adapter to Fairing
Position adapter
so the "missing"
screw hole on the
adapter is on the
inside-bottom.
Brake-side will be
the mirror image
of this photo.
Titan II 7.1" Speaker

Installation Guide

Kit Contents:
(2) 7.1" Speakers
(2) Speaker Adapters
(6) #10x⅞" Screws
(8) #6x¾" Screws
(2) Cloth-Covered Grills
Remove fairing and existing Harley speakers.
Place grills on adapter with cloth-side facing towards rider.
Begin by positioning clutch-side adapter as shown.
DO NOT OVERTIGHTEN SCREWS
Use new #10x⅞" screws in these three holes
Clutch-side adapter shown
Coaxial 180mm (7.1")
2 way - 20mm tweeter, 180mm woofer
4 ohm impedance
Effi ciency - 92.6 dB/SPL
Frequency range - 45-22kHz
100 Watts RMS power, 200 Watts peak
Integrated crossover
Page 1 of 2
BT7P1
ElectraGlide fairing
1996 to Present
Specifi cations: