Hardware Setup; Driver Installation - Fluid Audio SRI-2 User Manual

Hardware Setup

Place SRI-2 on a sturdy, flat surface.
1.
Leave enough room behind the SRI-2 for connection cables.
2.
CAUTION: Before powering the SRI-2 on or off, make sure to lower the volume of your
3.
monitor speakers (if connected) and remove headphones from your ears.
Connect the included USB cable between SRI-2 and host computer. Ensure the cable
4.
is fully inserted at both ends.
SRI-2 will power up automatically when plugged in.
5.

Driver Installation

For Windows 7 or Above Version:
1. Connect the SRI-2 audio interface to the computer.
2. The PC/Mac will detect the new USB driver and install automatically.
a.
3. Go to the website www.fluidaudio.com to download the complete USB driver with
additional features.
4. Follow the driver's install instructions.
5. After finishing the install, the SRI-2 can be used.
For Mac:
6. Connect the SRI-2 audio interface to the computer and it will be automatically detected.
On PC it will install the standard class compliant driver.
5