Page 1
USER USER VIG-100 Manual Manual Industrial-grade Wireless IoT Gateway with Arm ® Cortex ® Rugged, Compact, NB-IoT for LPWAN, -25°C to 70°C Operation 1.1.0 Edition 20181022...
Page 2
Record of Revision Version Date Page Description Remark 0.10 09/07/2018 Preliminary Release 1.00 09/17/2018 Official Release 1.10 10/22/2018 P39-47 Update...
Page 3
Disclaimer This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation or any infringements upon the rights of third parties, which may result from such use.
Page 4
Order Information Part Number Description ® VIG-100, Arm Cortex™-7, 2 M12 LAN, 1 USB, 4 COM, VIG-120M 2 CAN Bus, 8 GPIO ® VIG-100, Arm Cortex™-7, 2 LAN, 1 USB, 4 COM, VIG-120 2 CAN Bus, 8 GPIO ® VIG-100, Arm Cortex™-7, 2 M12 LAN, 1 USB, 4 COM,...
1.4.3 Dimensions of VIG-110M 1.4.4 Dimensions of VIG-110 1.4.5 Dimensions of VIG-100M 1.4.6 Dimensions of VIG-100 CHAPTER 2 GETTING TO KNOW YOUR VIG-100 2.1 Packing List 2.2 Front Panel I/O & Functions 2.3 Top Panel I/O & Functions 2.4 Bottom Panel I/O & Functions 2.5 Main Board Expansion Connectors...
Page 6
CHAPTER 3 SYSTEM SETUP 3.1 How to Open Your VIG-100 3.2 Installing MicroSD Card 3.3 Installing Mini PCIe Card 3.4 Installing LPWAN NB-IoT Module 3.5 Installing Antenna Cable 3.6 Installing SIM Card 3.7 Mounting Your VIG-100 CHAPTER 4 SOFTWARE SETUP 4.1 Console Port Login...
Optional NB-IoT module based on LPWAN technique and close relationship with 5G Mobile Networks which is going to be booming in a decade, Vecow VIG-100 is a great choice for IoT related seamless data acquisition and edge computing embedded applications.
Storage MicroSD 1, supports SDHC, up to 128GB (External) eMMC Optional, up to 32GB Power Power Input 6V to 40V, DC-in Power Interface 3-pin Terminal Block : V+, V-, Frame Ground Others Watchdog Timer Reset : 0.5 to 128 sec./min. per step Mechanical Dimensions (W) 106mm x (L) 160mm x (H) 50mm (4.2"...
Power Power Input 6V to 40V, DC-in Power Interface 3-pin Terminal Block : V+, V-, Frame Ground Others Watchdog Timer Reset : 0.5 to 128 sec./min. per step Mechanical Dimensions (W) 106mm x (L) 160mm x (H) 50mm (4.2" x 6.3" x 2.0") Weight 0.6 kg (1.32 lb) Mounting...
Page 15
I/O Interface Ethernet 2 10/100Mbps Ethernet, RJ45 connector Serial 2 software configurable COM RS-232/422/485with RJ45 connector (ESD 8KV) 1 USB 2.0 supports OTG (External) Console 1 independent debug console Reset Button 2 for H/W Reset and User Programming 10 for System Ready, Power Status and User Programming Antenna •...
2.1 Packing List Item Description VIG-100 Industrial-grade Wireless IoT Gateway (According to the configuration of you order, VIG-100 series may contain MicroSD. Please verify these items if necessary.) VIG-100 series accessory box, which contains ● Vecow Drivers & Utilities DVD ●...
2.2 Front Panel I/O & Functions In Vecow VIG-100 series, there are 3 sides of the I/O connectors which located on the front, top and bottom panels. Most of the general connections to computer devices, such as USB, COM (RJ-45 Connector), LAN, Console port, Reset button and LED indicators are placed on the front panel.
Page 21
Pin No. Function Pin No. Function USB_DATA+ USB_DATA- 2.2.3 PWR & Status LED Indicators RS-232/422/485 Status Console LAN 1 LAN 2 LED Color System Status Green (PWR LED) +V3.3 Power Ready Yellow (Status LED) System Running GETTING TO KNOW YOUR VIG-100...
Page 23
----------- ----------- ----------- ----------- RXD+ ----------- P1/P2 TXD+ DATA+ TXD- DATA- ----------- ----------- RXD- ----------- P1 & P2 LED Table: RJ-45 LED Color LED Status Connector Yellow RX Receive Blinking P1/P2 Green TX Transport Blinking GETTING TO KNOW YOUR VIG-100...
Page 24
Status Console LAN 1 LAN 2 There are two Ethernet ports auto-sensing 10/100 Mbps in RJ45 or M12 connectors on the front side of VIG-100 series. LAN 1 & 2 Pin Out : Pin No. 10/100 Mbps Pin No. 10/100 Mbps...
2.3 Top Panel I/O & Functions 2.3.1 Power Terminal Block VIG-100 supports 6V to 40V DC wide range power input by terminal block on the top side. Besides, onboard LTC4364 supports up to 80V surge protection. Pin No. Description Pin No.
2.4 Bottom Panel I/O & Functions 2.4.1 Programmable Reset Button RS-232/422/485 MicroSD GPIO VIG-100 is also equipped with a Programmable Button for users’ easy maintenance. 2.4.2 COM Port (DB9 connector) RS-232/422/485 MicroSD GPIO CN1 (P4) CN2 (P3) The same as P1~2 on the front panel, Serial port P3~4 can also be configured for RS-232, RS-422, or RS-485 with auto flow control communications.
Page 27
RS-232/422/485 MicroSD GPIO In VIG-100 series, it is offered with eight programmable I/O within TTL 3.3V tolerance. If the GPIO is logic high, it indicates the accurate signal mapping on SIO GPIO pin and vice versa. (Please refer to CH2.7 for detailed information.)
MicroSD card. (Please refer to CH3.6 for detailed information.) 2.5 Main Board Expansion Connectors 2.5.1 Top View of VIG-100 Main Board with Connector Locations CN1 (P4) CN2 (P3) BAT 1 MPCIe1 2.5.2 Bottom View of VIG-100 Main Board with Connector Locations...
Page 31
2.5.5 CN6 : NB-IoT Module Header There is a NB-IoT module header in VIG-100. NB-IoT Header Pin Out: Pin No. Description Pin No. Description ------ NB-IOT-TX ------ NB-IOT-RX ------ NB-IOT-RTS NB-IOT-CTS +V3.3 2.5.6 MPCIE1 : Mini PCIe Slot MPCIe1 GETTING TO KNOW YOUR VIG-100...
Page 32
There is a Mini PCIe supported with USB signal in VIG-100. Mini PCIe Pin Out: Pin No. function Pin No. function Reserved +V3.3 Reserved Reserved +1.5V Reserved Reserved Reserved Reserved +V3.3 Reserved +V3.3 USB_D+ USB_D- Reserved Reserved SMB_DATA SMB_CLK +1.5V...
2.5.7 BAT1 : RTC Battery BAT 1 VIG-100 real-time clock is powered by a lithium battery. It is equipped with Panasonic BR2032 190mAh lithium battery. It is recommended that you not replace the lithium battery on your own. If the battery needs to be changed, please contact Vecow RMA service team.
Page 34
2.6.2 SW1 : Boot Strap & USB2.0 Right angle +V5 Power(on/off) USB 2.0 RS-232/422/485 Status Console LAN 1 LAN 2 There are a SW1 of boot strap mode and USB2.0 power on/off in VIG-100. USB2.0 (Right angle) Item Boot strap Switch Position 5V Power NAND Mode...
Page 43
3.7.2 Wall Mount Step 1 Wall Mount parts as follows. Wall Mount screw X3 M3 screw X4 Din rail kit X1 Step 2 Lock the screws. HARDWARE INSTALLATION...
SOFTWARE SETUP 4.1 Console Port Login 1. Set up a connection between your host computer and VIG-100 console port. RS-232/422/485 Status Console LAN 1 LAN 2 2. Go to “Device Manger,” check “COM & LPT” and you will find “USB SerialPort (COM3)”...
Page 46
5. Make sure VIG-100 Power ON, an then a series of messages may appear. Enter “root” to login. 6. Please remember to change the default password “root” to avoid unauthorized access. Note : Please kindly note that the passward is not shown while typing.
Page 47
7. And then“root@VIG-100:~#” will appear. You are ready to begin configuring your system. INITIAL LOGIN...
4.3 I2C interface There are two different I2C buses on VIG-100 system, I2C-1 is for SOM internal use, and I2C-2 is connected to RTC and external I2C Header. If user wants to have external I2C header, please avoid the occupied I2C address.
4.5 Network VIG-100 supports two 100Mbps Ethernet RJ45/M12 type interfaces. User can configure their IP by static assign as following: Figure 4-5-1: Configure Static IP Or using DHCP client (e.g. dhclient) to grant IP address automatically: Figure 4-5-2: Configure IP via DHCP client...
4.6 CANbus VIG-100 is also integrated with two CANbus supporting CAN 2.0B protocol, and the CAN protocol was primarily designed to be used as a vehicle serial data bus meeting the specific requirements of this field. Simply follow the commands to establish SocketCAN interface: 1: Enable can0 &...
APPENDIX A : POWER CONSUMPTION Testing Board VIG-120 RAM : 512MB (On Board) USB 2.0-1 : Transcend USB 3.0 Flash 8GB LAN 1 : 100Mbps LAN 2 : 100Mbps Graphics Output : USB Console (with Putty) Test Program : Software RD provide Power Source : Chroma 62006P-100-25 Power on and boot to Linux Core...
Page 54
For further support information, please visit www.vecow.com This document is released for reference purpose only. All product offerings and specifications are subject to change without prior notice. No part of this publication may be reproduced in any form or by any means, electric, photocopying, or recording, without prior authorization from the publisher.