Logosol SH410 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

USER MANUAL

TRANSLATION OF USER MANUAL IN ORIGINAL FORMAT.

ARTICLE NO: 0458-395-2605

LOGOSOL SH410

Read through the user manual carefully and make sure you understand its contents

before you use the machine.

This user manual contains important safety instructions.

WARNING! Incorrect use can result in serious or fatal injuries to the operator or others.

Table of Contents

Summary of Contents for Logosol SH410

Page 1 USER MANUAL TRANSLATION OF USER MANUAL IN ORIGINAL FORMAT. ARTICLE NO: 0458-395-2605 LOGOSOL SH410 Read through the user manual carefully and make sure you understand its contents before you use the machine. This user manual contains important safety instructions. WARNING! Incorrect use can result in serious or fatal injuries to the operator or others.
Page 2 Logosol has been manufacturing wood processing machinery since 1988, and in that time we have supplied approximately 30,000 machines to satisfied customers all around the world.
Page 3: Table Of Contents
Planing knives Moulding knives Replacing circular sawblade Maintenance Feed Installing feed tables Four functions Planing tips Good to know Safety regulations for moulding knives Starter package SH410: moulding knives & examples of combinations Technical data EC DECLARATION...
Page 4: Safety Rules
SAFETY INSTRUCTIONS KEY TO SYMBOLS pieces which are so conical that there is a risk that the feeder rollers can lose their grip. Never place For your own safety, read through the user your hands or tools above or below the table when manual carefully and do not start the ma- the machine is running.
Page 5: Safe Distances
The machine is not to be modified and is not to be ally closer if short work pieces are processed. added to. Only use original parts supplied by Logosol Set up a form of cordoning which prevents which are designed for the purpose. After service, persons unintentionally entering the risk area the machine should be in its original condition.
Page 6: Required Tools
DESCRIPTION OF MACHINE Siting The SH410 Solo planer/moulder is a wood dimen- sioning machine which can process two sides of a Check the Solo planer/moulder on receipt. Any workpiece or, in some cases, three sides.
Page 7: Shavings Handling
LOGOSOL SH410 In-feed and out-feed table Logosol can supply in-feed and out-feed tables. You can also build your own in-feed and out-feed table yourself. It is very important that the in-feed table, planer table and out-feed table are precisely in-line, so that the cutter does not leave marks on the ends of the workpieces.
Page 8: Summary
SUMMARY Översikt Pos. Description Part no. Pos. Benämning Control panel Art.nr 7504-000- Manöverpanel 7504-000- Stop 7504-000- Anhåll 7504-000- Locking of stop 7504-000- Låsning av anhåll 7504-000- Press roller cpl 7504-000- Tryckrulle kpl 7504-000- Height scale 7504-000- Höjdskala 7504-000- Crank 7504-000- 7504-000- Ribbed feeder roller 7504-000-...
Page 9 LOGOSOL SH410...
Page 10: Electrical System
Bromskort Maskinen har bromskort för att stanna inom 10 s der. Kortet surrar något direkt efter stopp. Återst THE ELECTRICAL SYSTEM aldrig maskinen innan surret har slutat. Om bromsen slutar att fungara kan säkringen på kortet ”gått”. Elsystemet WARNING! Lethal voltage. Do not, at any If the machine does not start, this can be Livsfarlig spänning.
Page 11: Wiring Diagram
LOGOSOL SH410 WIRING DIAGRAM ELSCHEMA SOLOHYVEL, 400 V, 3-FAS Jord MANÖVERPANEL BROMSKORT 230V HUVBR. TILL KUTTERMOTOR FRÅN NÖDSTOPP KONT. TERMOKONT. KONT. KONT. GUL/GRÖN MATARMOTOR WARNING! Lethal voltage. Incorrect connection can result in life threatening injuries. Note that authorisation is required to open or carry out TERMOKONT.
Page 12 WIRING DIAGRAM ELECTRICAL DRAWING SH410, 230 VOLT 1-PHASE, EU Pe, EARTH ELECTRICAL MAIN BOX FUSE 1 A FUSE 1 A TOP DOOR SWITCH K1 18 HORIZONTAL CUTTER AND SAWBLADE MOTOR 3 kW CONT. FUSE 25 A (x2) THERMO SWITCH CONT.
Page 13: Knives And Circular Sawblade
LOGOSOL SH410 CUTTER WITH PLANING KNIVES, MOULDING KNIVES & SAWBLADE Make sure that the power is fully disconnected Check that the cutter can rotate freely when and that the cutter is not rotating before you the cover has been closed. This is checked, Kutter med planhyvelstål, profilstål och...
Page 14: Planing Knives
PLANING KNIVES Refer to the section 'Cutting using planing knives, moulding knives and circular sawblade' Adjustment screws for height adjustment Planing knives which are in the machine are set, i.e. set for use on delivery. The knives must however be regularly ground to ensure that the machine func- tions well.
Page 15: Moulding Knives
ASSEMBLY: Clean the bearing and spindle carefully. Fit the circular sawblade onto the spindle. Only circular sawblades supplied by Logosol are to be used. Fit the protective covers.
Page 16: Replacing Circular Sawblade
MAINTENANCE WARNING! Risk of serious damage if main- If the machine is not used for a longer period of time: tenance is neglected. • All power is to be disconnected and the ma- The Solo planer is easy to maintain. Required main- chine is to be thoroughly cleaned.
Page 17: Feed
The rollers are to balance directly above the the feeder roller is pressed up. Both sides of the workpiece. feeder roller are to then be sprung upwards equally. INSTALLING FEED TABLES Feed table SH410 (accessory) Included Support plate Feed table Link arms...
Page 18 1. Fit the lower mounting plate to the frame using the original bolts. 2. Fit the angle adjustment plate with two M8x20 incl. washers and locknuts. 3. Attach the support plate with a sleeve nut, (angle adjustment plate), M10 washer, (support plate), sleeve spacer, M8 washer and M8x10 bolt.
Page 19 LOGOSOL SH410 1. Fit the link arms outside the support plate usisng sleeve nuts, (link arm), M10 washer, (support plate), sleeve spacer, M8 washer and M8x10 bolt. 2. Fit the feed table directly to the cast iron table in the machine using the original bolts.
Page 20 1. Adjust the angle of the table. Place something between the bolt and the machine to avoid damaging the coating. When the plate is adjusted to the correct angle you tighten the M8 bolts and loosen the adjustment bolt a couple of turns.
Page 21: Four Functions
Logosol has magnetic stops which Always check that the cutter can rotate freely attach to the in-feed table. (An alternative can...
Page 22: Good To Know
40 mm moulding knives which can be achieve a wall that is as tight as possible. combined to achieve the required moulding. Special steel can be ordered from Logosol. Also...
Page 23 LOGOSOL SH410 RESULT Hard materials provide better surfaces than soft. Small depressions and light small flames affect the shavings which accumulate around the edge and is pressed down into the wood. This phenomena increases when the steel loses sharpness. Noticeable cutter impacts in the planed wood are...
Page 24: Safety Regulations For Moulding Knives
Make sure that no children are in the vicinity . Before SH410 is started with these mould- ing knives: Check that the cutter can rotate freely and read the machine's safety instruc-...
Page 25: Starter Package Sh410: Moulding
LOGOSOL SH410...
Page 27 LOGOSOL SH410...
Page 28: Technical Data
TECHNICAL DATA SH410 PROCESSING MEASUREMENT Max material width 410 mm Max panel planer width 410 mm Max panel planer height 260 mm Min planer height 6 mm Max splitting 80 mm CUTTING EQUIPMENT Cutter diameter 72 mm Planing knives 2 x 410mm HSS...
Page 29 LOGOSOL SH410...
Page 31: Ec Declaration
LOGOSOL SH410 Declaration of conformity Manufacturer MORETENS AB, Nifsåsvägen 11 S-831 52 Östersund, Sweden Tel. +46 63 121890, hereby confirms that SH 410, with part. no. 245-000 has been manufactured in conformity with: Machinery Directive 98/37/EC, EMC Directive 2004/108/EC and LVD directive 2006/95/EC,...
Page 32 LOGOSOL SWEDEN Fiskaregatan 2, SE-871 33 Härnösand, Sweden Tel. +46 (0) 611-182 85 | Fax +46 (0) 611-182 89 info@logosol.se | www.logosol.se...