Remax RB-T1 Operating Manual

BLUETOOTH HEADSET
OPERATING MANUAL
A.Mini USB charging socket B.Earbud
C.Talk Button/LEDIndicator D. Microphone

SPECIFICATION:

Model: RB-T1
Bluetooth Version: 4.0
Operation frequeny: 2402-2480 MHz
Talk time: ≤Up to 5hours
Standby time: ≤100hours
Charge time: 2 hours
Wireless range: 10m
Connection: Support multipoint connection, can connection two sets of equipment at the
same time
Voice quality: HD Audio(16KHZ)
Weight: 5g

ACCESSORIES:

We have supplied you with 3 different size earbuds. Try all the size and pick the one that is
most comfortable and fit for you.
RB-T1 have equipped with 3 ear cap, to fit a new earbud, position the earbud over the
speaker housing and gently press down on the earbud.

CALL INSTRUCTIONS :

A. Power on: In the state of shutdown, press &hold the button for 2 seconds until the white
light is on, "power on"&"Bluetooth connected "voice prompt will be heard.
B. Standby: White light blinks once every 7 seconds, after 5 min connectionless mode,
RB-T1 will be power off automatically.
C. Power off: Press & Hold Button for 2 seconds, the headset is power off and the red light
go on for 1 second.
D. Answer a call: when incoming call, please just press power button one time.
E. Hang Up a call: Tap Talk button once while on call.
F. Transfer a call: When you are talking, Press & Hold Button for 1 second, release the
button after tone, which can switch between the Headset and mobile phone call
at the moment.
G. Reject a call: Press & Hold Button for 2 seconds, release the button after tone.
H. Redial: while in connect standby mode, press & Hold button for 2seconds, redial last
number. Chinese voice prompt will be heard.
I. Low power prompt: when the Bluetooth is low power, there is "low battery" voice prompt.
J.Language switch: In the state of charging, Press button until the white light flashes twice,
then Voice from the Chinese into English or from English into Chinese.