Removing The Front Cover; Specifications - Yamaha NS-C525 Owner's Manual

Hide thumbs Also See for NS-C525:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at four points
and can be removed if desired. To remove the cover, hold
on to both sides and slowly pull straight away from the
speaker. To reattach, line up the four holes on the inner
surface of the cover with the four corresponding pegs on
the speaker and push gently.
Note:
When the cover is removed, take care not to touch the
speaker units with your hands or to exert excessive
force with tools.
4
E-

SPECIFICATIONS

Type ............................. 2-way bass reflex speaker system
Driver ...................................... 13 cm (5") cone woofer x 2
Impedance ................................................................... 6 Ω
Frequency Response ................... 57 Hz to 50 kHz (-10dB)
Nominal Input Power ................................................... 45W
Maximum Input Power ............................................. 200 W
Sensitivity .................................................. 89 dB/2.83 V/m
Crossover Frequency ................................................ 5 kHz
Dimensions (WxHxD) ...................... 500 x 170 x 226.5 mm
(19-11/16" x 6-11/16" x 8-15/16")
Weight ................................................. 7.4 kg (16 lbs.5 oz.)
• Specifications subject to change without notice due to
product improvements.
• Care should be taken not to exceed the input power
values noted above.
Magnetic shielding type
3 cm (1") dome tweeter

Advertisement

Table of Contents
loading

Table of Contents