Tait TMAA05-01 Installation Instructions

TMAA05-01/TMAA05-04 GPS Receivers
Installation Instructions
Introduction
The TMAA05-01 and TMAA05-04 GPS receivers
integrate a high performance 12-channel GPS receiver
into a fully weatherproof, IPX7-rated housing.
The TMAA05-04 (shown at right) is supplied with a
magnetic mount b . The TMAA05-01 is identical, but
is supplied without the magnetic mount.
The magnetic mount is available separately under part
number TMAA05-02.
The TMAA05-03 mounting plate is also available
where a permanent mounting is required.
Both GPS receivers include an adapter
connecting to the auxiliary connector of your mobile
radio.
The GPS receivers operate at a frequency of
1575.42MHz (±10MHz).

Installation Precautions

Warning When mounting the GPS receiver inside a vehicle, make sure you mount
it securely. Unsecured equipment is dangerous to the vehicle occupants.
Notice When drilling holes in a vehicle, check that drilling at the selected points will
not damage existing wiring, fuel tanks, fuel lines, brake pipes or battery cables.
Notice GPS accuracy may be influenced by close radiation sources (such as transmit-
ting radio antennas). This must be taken into consideration when choosing the mounting
location of the GPS antenna and cabling. If unsure please contact your radio provider.
© Tait Limited June 2013
www.taitradio.com
402-00080-01
c for
b
c