Advertisement
Quick Links
For step-by-step instructions on using the Breathe
NIOV ventilation system, see the manual Breathe NIOV
Ventilation System Patient Instructions for Use, shipped
with the ventilation system.
1
2
3
4
1 Oxygen cylinder
2 Ventilator
3 Belt clip
4 Battery charger
7
6
5
5 Interface
6 Oxygen supply hose
7 Oxygen regulator
1
2
3
3
Slide the regulator over
the neck of the cylinder,
and line up the pins on
the regulator with the
holes in the cylinder neck.
Tighten the tee screw on
the regulator by turning
the handle clockwise.
Push the small oxygen
supply hose connector
onto the ventilator
oxygen supply connection
until it snaps into place.
Advertisement
Summary of Contents for Niov Breathe
- Page 1 For step-by-step instructions on using the Breathe Slide the regulator over NIOV ventilation system, see the manual Breathe NIOV the neck of the cylinder, Ventilation System Patient Instructions for Use, shipped and line up the pins on with the ventilation system.
- Page 2 Connect the green Plug interface into oxygen supply hose ventilator port. connector to the oxygen regulator by turning it clockwise. Loop interface tubing Open the cylinder air flow over the ears so valve. pillows are positioned snugly inside the nostrils. Adjust tubing length Turn on the ventilator.