Setting Up Channels; Scanning For Channels; Skipping Channels - Vizio D24h-G9 User Manual

SETTING UP CHANNELS

You can use the TV's Channels menu to:
• Find Channels
Channels
• Select channels to skip
Find Channels
• Select Analog Audio mode
Skip Channels
• Select the language for Digital
Analog Audio
Audio
Digital Audio
• Set Parental Controls
Parental Control

Scanning for Channels

The TV may need to scan for channels before it can display programs
and their associated information. A channel scan is required for free
over-the-air channels (using an antenna) and cable channels from an out-
of-the-wall connection (without a cable box). Moving the TV to an area
Back
with different channels requires the TV to scan for channels again.
To perform an Auto Channel Scan:
Stereo 1. From the CHANNELS menu,
highlight Find Channels, and
English
press OK. The auto channel scan
begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the Exit button on the
remote.
If the channel scan is canceled, the
channels that were already discovered
are retained. A new channel scan will
clear all channels.

Skipping Channels

After a channel scan is completed, you may find that some channels are
too weak to watch comfortably. There may also be some channels you do
not want to view. You can remove these channels from the TV's memory
with the Skip Channel feature.
Channels that have been removed with the Skip Channel
feature can still be viewed if the channel is entered using the
Number Pad. If you wish to completely block a channel from
Find Channels
Back
being viewed, use the parental controls. See Locking and
Unlocking Channels .
Channels Found
Digitial : 8
To remove a channel:
Analog: 12
1. From the CHANNELS menu,
45% Complete
highlight Skip Channel, and press
OK. The SKIP CHANNEL menu is
Cancel
displayed.
2. For each channel you wish to
remove, use the Up/Down
Arrow buttons on the remote to
highlight the channel and press
OK. A P
each channel you select.
3. When you have selected all of
the channels you wish to remove,
press the Exit button on the
remote.
Skip Channels
0 Test 0
1 Test 1
2 Test 2
appears to the right of
3 Test 3
4 Test 4
3
Back
28