GOOD LIFE BarkWise Complete Instruction Manual

BarkWise™ Complete

Included In Your Package

BarkWise™ Complete

Getting Started

1. Charging BarkWise™
Insert the small end of the AC adapter into BarkWise as shown
below and plug the other end into an outlet. The blue LED
light will turn on to indicate that the unit is plugged in. Bark-
wise will be fully charged after 2 hours. The blue LED light will
still be turned on but you can now unplug the unit.
When BarkWise is running low on battery and needs to be
charged again, the red LED will flash.
Battery life varies between 12-24 hours depending on which
features are used (vibration, sound or remote) and how often
the unit is activated. Make sure to charge BarkWise daily. This
will also give your dog regular breaks from training.
2. Turn BarkWise™ On / Off
Power BarkWise ON by pressing and holding the power but-
ton on the top of the unit for 5 seconds. Press firmly and listen
for the button to click. The unit will beep 3 times with a
Blue LED
Power Button
Instruction Manual
Nylon Strap
ON / OFF
Red LED
Remote Control
(Continued from lefthand column)
flashing blue light. BarkWise™ is now powered on.
Power OFF by pressing and holding the power button for 5
seconds. It will beep 1 time and the red light will flash.

3. LED lights

Blue LED
Power Button
• Blue LED Light: Flashes when the unit is powered on or
when it is activated by barking or the remote. Turns on
and stays a solid blue when the unit is plugged in.
• Red LED Light: When the power button is being pressed,
the red light indicates that the unit is being powered
OFF. In all other cases, the light flashes when BarkWise is
running low on power and needs to be charged.

4. Remote Control

Press the button on the remote
to activate BarkWise™ (a blue LED
light will indicate the button is
pressed).
This will activate BarkWise based
on your control panel settings.
You can use the remote control
up to 75 feet away from the unit.
AC Adapter
ON / OFF
Red LED