Advertisement
Types of Sealing
Parallel Thread
per EN 837
per DIN 3852-E
Correct sealing of the process connections with parallel threads at the sealing face must be made using suitable flat gaskets and sealing rings.
The sealing of the tapered threads (for example, NPT thread) is made by providing the thread with additional sealing material such as, PTFE tape
(EN 837-2).
Dismounting and Disposal
ATTENTION: Residual media in the dismounted pressure transmitter can result in a risk to persons, the environment, and equipment. Take sufficient
precautionary measures.
Dismounting: Only disconnect the pressure transmitter once the system has been depressurized.
Disposal: Incorrect disposal can put the environment at risk.
Dispose of instrument and packaging materials in an environmentally compatible way and in accordance with the country-specific waste disposal
regulations.
Rockwell Automation Support
For technical support, visit http://www.rockwellautomation.com/support/overview.page.
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately
from any unsorted municipal waste.
Rockwell Automation maintains current product environmental information on its website at
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Publication 836P-IN002B-EN-P - December 2017
Supersedes Publication 836P-IN002A-EN-P - October 2015
Tapered Thread (NPT)
NPT
Copyright © 2017 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
10001930278 Ver 01
14142258.01
Advertisement
