STAXX ™ Parts List Mount Column 3/8-16 x 2-1/2" Hex Head Bolt 10-32 x 5/8" Phillips Pan Head Screw Pole Cap 401328 700268 702200 105195 (STX-02S, STX-02W, STX-03S, STX-03W) 407602 (STX-33S, STX-33W) Base Plate 1/2-13 x 3" Socket Set Screw Dog Washer 7/32"...
Page 3
1a | MOUNT DESK EDGE CONFIGURATION Spacer Spacer 7/32" 800.524.2744 InnovativeWorkspaces.com PAGE 3 OF 10...
Page 4
1b | MOUNT GROMMET CONFIGURATION 7/32" 7/32" 7/32" 800.524.2744 InnovativeWorkspaces.com PAGE 4 OF 10...
Page 5
1c | MOUNT THRU-DESK CONFIGURATION 3/32" 7/32" IMPORTANT: When inserting pole into mount, the dimples should be aligned Set screw in mount Dimples perpendicular to positioned 180° 3/32" the rear edge of from dimples mounting surface. 800.524.2744 InnovativeWorkspaces.com PAGE 5 OF 10...
Page 7
3 | EXTENSION ARMS IMPORTANT: Install part (P) in the orientation as shown above. When washer, part (P), is installed correctly, the lower extension arms will not rotate past the back of the mount. 800.524.2744 InnovativeWorkspaces.com PAGE 7 OF 10...
Page 8
4 | MONITOR TILTER ARE YOU INSTALLING: STX-03S, STX-03W, STX-33S, STX-33W? IF NOT, PLEASE CONTINUE TO NEXT STEP. 800.524.2744 InnovativeWorkspaces.com PAGE 8 OF 10...
Page 9
4 | MONITOR TILTER ARE YOU INSTALLING: STX-02S, STX-02W, STX22S, STX-22W? IF NOT, PLEASE CONTINUE TO NEXT STEP. ARE YOU INSTALLING: STX-03S, STX-03W, STX-33S, STX-33W? IF NOT, PLEASE CONTINUE TO NEXT STEP. NOTE: Height adjust Height adjust Monitors with the height adjust adapter adapter adapters attached should be...
Need help?
Do you have a question about the STAXX STX-02W and is the answer not in the manual?
Questions and answers