Rukket Spor Net Assembly & Instruction Manual

1. Unfold the frame's middle
cross beam. The frame will lay at
on a rubber base.
4. On the left arm, fully extended
the berglass top half of the arm.
Lock into place with the cotter
pin.
Check out our video instructions at:
1
2. Unfold the legs, making sure
that the locking button is fully
extended.
4
5. Bring up the right arm, but do
not extend it all the way up. Rest
the base pin on the groove that is
half way up the bottom base
plate.
/ RukketSports
2
3. Bring up the left arm. Lock it
into place using the base pin.
Make sure the pin is fully inserted
into the base.
5
6. Fully extend the berglass top
half of the left pole. The arms
should be slanted in the same
direction, as shown above.
3
6