EUROTECNO S.R.L Maior Omnia Manual Of Instructions, Use And Maintenance

Hide thumbs

Table of Contents

Quick Links

Download this manual

Manual of Instructions, Use and Maintenance

Maior Omnia

Maior®

Eurotecno s.r.l. società unipersonale

Via Proventa, 120/1

48018 Faenza (RA) – Italy

Tel. +39 0546 646821

Fax +39 0546 675091

THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the Maior Omnia and is the answer not in the manual?

Questions and answers

Summary of Contents for EUROTECNO S.R.L Maior Omnia

Page 1 Manual of Instructions, Use and Maintenance ® Maior Omnia Maior® Eurotecno s.r.l. società unipersonale Via Proventa, 120/1 48018 Faenza (RA) – Italy Tel. +39 0546 646821 Fax +39 0546 675091 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
Page 2 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
Page 3 48018 Faenza (RA) - Italy Tel. +39 0546 646821 Fax +39 0546 675091 TYPE OF DOCUMENT: Manual of Instructions, Use and Maintenance PRODUCT: Maior Omnia® YEAR OF CONSTRUCTION: 2017 CONFORMITY: THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
Page 4 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
Page 5 INDEX STANDARDS AND GENERAL WARNINGS TECHNICAL DATA / CHARACTERISTICS INSTALLATION OPERATION AND USE DIAGNOSTICS ACCOMPANYING DOCUMENTATION THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
Page 6 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
Page 7: Table Of Contents
1.5. Identification plate .................... 6 1.6. MACHINE DESCRIPTION .................... 7 1.6.1 Main units 1.7. OPERATORS QUALIFICATION ................... 8 1.8. GENERAL SAFETY WARNINGS ................. 8 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 1 - 1...
Page 8: Foreword
THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. - REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. This manual has been drawn up in compliance with the requirements of the Machinery Directive 2006/42/EC. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 1 - 2...
Page 9: Method For Consulting The Manual
This symbol indicates accident prevention rules for the operator and/or any other exposed person. CAUTION: This symbol draws the attention to the risk of damaging the machine and/or its components. NOTE: This symbol provides useful information. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 1 - 3...
Page 10: Preparations For The Pre-Installation Phase
Preparation of an area to unpack the equipment, and to install/assemble it. Preparation of the auxiliary services suitable for the equipment (e.g. power supply, audio-visual cables etc..). THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 1 - 4...
Page 11: Declaration Of Conformity
1 – STANDARDS AND GENERAL WARNINGS 1.4. DECLARATION OF CONFORMITY Facsimile. The original document is contained in the attached documentation. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 1 - 5...
Page 12: Identification Plate
ODEL AIOR MNIA XXX - 20XX ERIAL NUMBER 230 V 50 H OLTAGE REQUENCY 0,375 KW N° P OWER HASES Image 1 - 1 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 1 - 6...
Page 13: Machine Description
1.6. MACHINE DESCRIPTION The equipment, hereafter called Maior Omnia®, has been designed and assembled as a lifting device able to move a monitor or a Lcd television on the 3 axis (x,y,z). The possible movements that the screen can realise are: downwards and upwards (regulating the length/stroke of the mechanical arm), rotation (moving the screen laterally), tilt (inclination of the screen, where available).
Page 14: Operators Qualification
• Use an appropriate and safe lifting equipment. • Do not dismantle any part or unit of the Maior Omnia® without previous authorisation of the manufacturer’s technicians. • As regards the disposal of the packaging materials, respect the environmental protection legislation in force.
Page 15 2 – TECHNICAL DATA / CHARACTERISTICS INDEX 2.1. TECHNICAL CHARACTERISTICS ................2 THE PRESENT MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 2 - 1...
Page 16 1000 mm Equipment weight 63 kg Electrical system 220 V – 110 V Power circuit 50 Hz – 60 Hz Frequency Table 2 - 1 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 2 - 2...
Page 17 CONNECTION TO SOURCES OF ENERGY ........... 15 3.6.1 Connection and sectioning of the electric power ........15 3.7. DEMOLITION AND DISPOSAL ..............16 3.7.1 Dismantling procedure ................16 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 1...
Page 18: General Safety Warnings
During all the phases of work and maintenance. Table 3 - 1 NOTE Clothes and means of protection must comply with the requirements of Directive 89/686/ EEC concerning personal protection equipment. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 2...
Page 19: Machine Transport
Parts description: Quantity: Pre-assembled Omnia® Assembly template (Omnia® Cielo) Wi-Fi Router Briefcase* (* containing: manual of installation, use and maintenance - further technical documentation) THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 3...
Page 20: Handling And Installation
Sustaining ceiling support plate for Maior Omnia® Tv lift;  Maior Omnia® Tv lift with positioning structure. Number of  For the equipment installation are needed two installers. operators THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 4...
Page 21 The ceiling support plate (step A, paragraph 3.5.1.1) contains holes with a 9-mm diameter through which will be fastened the Maior Omnia® (lift). For the fastening process, make use of appropriate screw anchors depending on the type of support (ceiling material).
Page 22: Ceiling Installation Procedure
(the central hole represents the passage of power and audio-visual cables, manual commands and home automation system to the ceiling). B) Preparation of the Maior Omnia® lift with positioning structure. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 6...
Page 23 D) Separate the positioning structure by removing the corresponding screws (x3), as indicated. Keep, then, the structure in the original packaging. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 7...
Page 24 G) Test the movements of the machine with all the available commands (the operating modes are described in paragraph 4.1). Once complete, close the machine making it go back to the Home position. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 8...
Page 25: Shell Assembly Procedure
A) Basic detail of the fiberglass shell with elliptical plexiglass installed – detail regarding the position of the jack for LED RGB lights connection. B) Image of the fastening magnet. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 9...
Page 26 C) Lower the machine for approximately 10 cm, to simplify the shell positioning. Gather any protruding and/or dangling cables. D) Introduce the shell from below, lifting it up to the attachment point of the magnet. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 10...
Page 27 E) Use the 2 wing nuts to fasten definitely the shell to the structure. F) Connect the LED RGB lights jack from the shell to the machine. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 11...
Page 28 3 - INSTALLATION G) Apply the shell cover, fastening it with the screws. H) Install TV bracket and covers. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 12...
Page 29: Equipment Installation (Omnia® Terra - Omnia® Studio)
TV cables and the Ethernet network (if available) to the equipment. WARNING: Make sure that the power grid is not active during the power cables connection phase. Table 3 - 3 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 13...
Page 30: Screen Installation
Prepare the adequate screws to fasten the TV, making sure that the length of the screws is appropriate in order to install your device. Get the television close to the Maior Omnia®, in front of the TV fastening bracket unit, identifying the coinciding holes.
Page 31: Connection To Sources Of Energy
Before proceeding, make sure that the line voltage corresponds to the one that appears in paragraph 2.1 "Technical data/characteristics". The equipment must be connected to the electric power through the corresponding cable. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 3 - 15...
Page 32: Demolition And Disposal
3.7.1 Dismantling procedure Should it be necessary to disassemble the Maior Omnia® in order to carry out its demolition, proceed as follows: • Check the environmental protection laws, in force where the equipment is in use.
Page 33 INTENDED AND UNINTENDED USES ............ 13 4.3.1 Intended use 4.3.2 Unintended use 4.4. WORKING AREAS AND DANGEROUS AREAS ........14 4.5. EMPLOYED SAFETY DEVICES .............. 14 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 1...
Page 34: Operation Description
WARNING: If there is not a complete view of the Maior Omnia® field of action, the downwards and upwards movements of the Maior Omnia® are absolutely prohibited. The work cycle is divided into several stages, with four different control ways: ...
Page 35: App Operating Mode For Smart Devices
“maiorwifi”, you will have to connect the Wi-Fi Router to your internet modem with an ethernet cable (maintaining the original configuration) (see image 4-2): Maiorwifi Internet modem Router Switch port port Image 4 - 2 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 3...
Page 36: App Installation And Connection
.exe file (using it from your PC or Android device). Maior® cannot guarantee the full compatibility with the devices on the market. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 4...
Page 37 Maior® is installed. Move the machine only when you can directly see it, in order to avoid any damage or inconvenience to persons, animals or objects. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 5...
Page 38: Method Of Use / Characteristics
(relying on the same list position of the previous smart device). WARNING: Remember to update all the configurations of your new device to avoid any damage or inconvenience to persons, animals or objects. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 6...
Page 39 4 – OPERATION AND USE  Menu for the movements control: here you can control directly your Maior Omnia®, scrolling the pad in the direction in which you want to move it. STOP Press this button to stop completely the machine during any movement.
Page 40 When a light tonality is selected, as soon as the favourite configurations are saved in the Presets menu, it is automatically stored with the machine positions. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 8...
Page 41 (relying on the same list position of the previous device). WARNING: Remember to update all the configurations on your new device, to avoid damages or inconveniences to persons, animals or objects. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 9...
Page 42: Push-Button Panel Operating Mode
MANUAL button and, simultaneously, the reference button. Similar procedure for the color choice: pressing the “Color choice” button and then, immediately, its secondary buttons causes its activation. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 10...
Page 43 Go back to the Home position (closed column, horizontal screen, STOP base rotation 0°, Stops any current Led lights off) movement Image 4 - 9 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 11...
Page 44: Wall Commands / Home Automation System Operating Mode
(+ BLACK = ROTATION TO THE RIGHT) COLOR SELECTOR (+ BLACK = TILT DECREASE) MANUAL / STOP POWER CABLES CONNECTIONS Image 4 - 10 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 12...
Page 45: Intended And Unintended Uses
A different use, from the one exposed in this manual, is considered as an improper use, so it is forbidden. The manufacturer declines any responsibility for every different use of the machine, not contemplated in this manual. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 13...
Page 46: Working Areas And Dangerous Areas
It is also forbidden to tamper with - or to remove – the security devices and/or to dismantle the machine. The manufacturer declines any responsibility for the lack of observation of this regulation. THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 4 - 14...
Page 47 5 - DIAGNOSTICS INDEX 5.1. PROBLEMS, CAUSES AND REMEDIES ..............2 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 5 - 1...
Page 48 Strange noises during the vertical the machine or of the interior Risk of damages. Call the movement chain. authorised assistance. Table 5 - 1 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 5 - 2...
Page 49 6 – ACCOMPANYING DOCUMENTATION INDEX 6.1. LIST OF ACCOMPANYING DOCUMENTATION ............2 6.2. ANCHORS SPECIFICATIONS (in electronic CD form) ..........2 THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 6 - 1...
Page 50 Technical data of the chemical anchors. Attached n.2: Types of anchors (drilled supports, hollow filler blocks/tiles, etc…). Attached n.3: Types of anchors (solid supports, reinforced concrete, solid bricks, etc…). THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L. – REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN. 6 - 2...