Cobra microTALK PR 950 DX Operating Instructions Manual page 7

O P E R AT I O N
To scan memory locations ( c o n t i n u e d ) :
b) Push the
CHANNEL SELECT
CHANNEL SELECT b u t t o n
button up or
down to resume
scanning memory
locations.
c) Press the MODE button to proceed to
other functions.
If you do not press any button within
10 seconds, the radio will automatically
resume scanning memory locations.
(NOTE: If you want to reduce the number of
memory locations being scanned you need to
"unprogram" all unwanted locations by
changing both the main channel and privacy
code to 00. See Programming Memor y
Locations, page 8.)
Turning Roger Beep Off and On
With Roger Beep turned on, your listener
will hear an audible tone when you release
the TALK button. To change Roger Beep mode:
1. Press the MODE button until the Roger
Beep icon flashes and the current setting
("on" or "off") is displayed.
M O D E
b u t t o n
11
ENGLISH
2. Push the CHANNEL SELECT button up or
down to turn Roger Beep on or off.
3. To enter the new
E N T E R
setting you can
b u t t o n
press and release
the ENTERbutton,
or press the MODE
button to enter the new setting and
proceed to other functions.
Turning Keystroke Tones Off
and On
With Keystroke Tones turned on, your unit will
sound beeps each time you press a button or
change a setting. To change Keystroke Tones:
1. Press and hold the ENTER button for
5 seconds to turn k e y s t ro k et o n e so ff. A
double beep will sound and the Beep icon
will disappear.
2. To turn keystroke tones back on, press and
hold the ENTER button for 5 seconds again.
A single beep will sound and the Beep icon
(N O T E : The unit must not be
will appear.
in Lock mode during these steps.)
ENGLISH
Using Call Tones and VibrAlert
Your microTALK radio can alert you to
®
incoming signals by sounding an audible call
tone, by vibrating silently, or both. To change
ring settings:
1. Press the MODE button until the Ring
Setting icon flashes and the current setting
(Vibra + Ring, Vibra Only, or Ring Only) is
displayed.
Vibra + Ring Vibra Only Ring Only
2. Push the CHANNEL
CHANNEL SELECT
SELECT button up
b u t t o n
or down to change
the ring setting.
3. Press and release
the ENTER button to enter the new setting,
or press the MODE button to enter the new
setting and proceed to other functions.
O P E R AT I O N
Changing Call Tone Settings
™
You can choose between ten different call
tone settings to transmit a unique call alert.
To select a call tone setting:
1. With the power turned off, press and hold
the CALL button as you turn the power
on. The number of
CALL button
the current call
tone setting will
flash and the
tone will sound
for one second.
2. Push the CHANNEL SELECT button up or
down to hear the other call tone settings.
3. With the number of your desired call
tone setting displayed, press and release
the TALK button or ENTER button. Your
selection will be entered.
E N T E R
b u t t o n
TALK button
4. If no buttons are pushed for 15 seconds,
the unit will automatically enter the last
call tone pattern that was displayed.
12