Table Of Contents; Introduction; Warranty; Notes, Cautions, And Warnings - Holland Atlas 55 Installation, Operation And Maintenance Manual

Contents
Contents
Introduction ..........................................................................2
Warranty ...............................................................................2
Notes, Cautions, and Warnings ..............................................2
Section 1 - Safety Instructions ..............................................3
Section 2 - Model and Serial Number .................................. 4
Section 3 - Pre-Installation Instructions ............................... 6
Section 4 - Recommended Bracing....................................... 7
Section 5 - Welding Standards .............................................. 8
Section 6 - Installation Instructions ..................................... 9
Section 7 - Landing Gear Operation ................................... 10
Section 7.1 - Pre-Inspection ............................................... 10

Introduction

This manual provides information necessary for the installation,
operation and maintenance of the SAF-HOLLAND
iM model landing gears.
Read this manual before using or servicing this product and
keep it in a safe location for future reference. Updates to this
manual, which are published as necessary, are available on
the internet at www.safholland.us.
When replacement parts are required, SAF-HOLLAND
recommends the use of only SAF-HOLLAND
list of technical support locations that supply SAF-HOLLAND
Original Parts and an Aftermarket Parts Catalog are available
on the internet at www.safholland.us or contact Customer
Service at 888-396-6501.

Warranty

Refer to the complete warranty for the country in which
the product will be used. A copy of the written warranty is
included with the product or available on the internet at
www.safholland.us.
2
Page
Atlas 55, 65 and
®
highly
®
Original Parts. A
®
®
XL-LG20004UM-en-US Rev B · 2018-09-17 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Contents
Section 7.2 - Landing Gear Orientation .............................. 10
Section 7.3 - Landing Gear Operation During Coupling ...... 11
Section 7.4 - Landing Gear Operation During Uncoupling .. 12
Section 8 - Routine Service and Inspection ........................ 14
Section 8.1 - Landing Gear Inspection (Before Use)............ 14
Section 8.2 - Lubrication ................................................... 14
Section 8.3 - Cleaning ....................................................... 14
Section 8.4 - Hardware Inspection ..................................... 15
Section 8.5 - Landing Gear Alignment................................ 15
Section 9 - Troubleshooting ............................................... 16

Notes, Cautions, and Warnings

Before starting any work on the unit, read and understand all
the safety procedures presented in this manual. This manual
contains the terms "NOTE", "IMPORTANT", "CAUTION", and
"WARNING" followed by important product information. These
terms are defined as follows:
NOTE: Includes additional information to enable accurate
and easy performance of procedures.
IMPORTANT: Includes additional information that if
not followed could lead to hindered
product performance.
Used without the safety alert symbol,
indicates a potentially hazardous
situation which, if not avoided, could
result in property damage.
Indicates a potentially hazardous
situation which, if not avoided, could
result in minor or moderate injury.
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury.
Page