Manufactured in The Netherlands to European Community 2006/95/EC & 2004/108/EC Standards No. IEC 61340-5-1 = EPA = Electrostatic Protected Area, only permitting use totally ESD safe materials and production aids to fully protect ESD sensitive electronics against harmful electrostatic discharges. antistatic-esd-solutions.com • sales@antistatic-esd-solutions.com...
If the appliance is not operating properly, has been damaged, left • outdoors or dropped in water, contact your supplier and return unit. Never use appliance if suction is blocked, with completely restricted • airflow or blocked air exit. antistatic-esd-solutions.com • sales@antistatic-esd-solutions.com...
Page 4
Never re-use filter bags ! Repairs must only be performed by an authorized service agent in • accordance with national and local safety regulations. Repairs by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work. antistatic-esd-solutions.com • sales@antistatic-esd-solutions.com...
Page 5
PERATING INSTRUCTIONS Compact lightweight multi-functional EPA blowvac (E version: with special vacuum power regulation) for professional dust removal from hard to reach places from ESD sensitive electronic equipment, assembly lines, r&d area’s and in field-service. Operating instructions for vacuuming: Firmly press hose-end into suction opening.
8. Place new filterbag in housing and close with front cover and metal bottom lock. ATTENTION: Never use appliance without paper filterbag and (HEPA) micromotorfilter in place. Never re-use spend filterbags. Failure to carry out necessary periodic maintenance can significantly reduce the lifespan of your appliance! antistatic-esd-solutions.com • sales@antistatic-esd-solutions.com...
1. Switch appliance to “OFF” and unplug from your outlet. 2. Check for blockages in hose and/or nozzles. 3. Replace filter bag. 4. Inspect motor and exit filter. Replace if clogged. NOTE: If appliance is still not working properly please contact your supplier and return unit. antistatic-esd-solutions.com • sales@antistatic-esd-solutions.com...
Page 9
The above warranty shall not apply to any MT appliance that has been modified, or has been damaged by negligence, misuse, accident, failure to follow the MT user manual. Wear and tear parts as e.g., hoses, accessories and cordset, are not covered by above warranty. antistatic-esd-solutions.com • sales@antistatic-esd-solutions.com...
Need help?
Do you have a question about the MUNTZ 555-ESD-S-E GS and is the answer not in the manual?
Questions and answers