Table of Contents
Advertisement
MP3 Encoding
1
Connect the Audio Output port on the external audio source (or the Line
Out port) to the ENC port on the device with the Line cable.
2
Slide the
switch to the ENC position begin MP3 encoding.
REC/ENC
36
3
Slide the
switch to the REC position while recording to stop
REC/ENC
the encoding, and a new encoding file will be created.
Recording will take place in the order of L001, L002, L003.... When the recording
is finished, the files will be saved as MP3 files.
N
N
o
o
t
t
e
e
:
:
Bit Rates can be set within the range of 32Kbps~128Kbps.
To pause during Encoding, press the
button.
Press the button once again to recommence recording.
Volume can be adjusted from level 0 to 10 while monitoring the Encoding.
N
o
t
i
c
e
:
N
o
t
i
c
e
:
Do not disconnect the Line cable during Encoding.
If the battery is not charged enough, encoding will not be done.
Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
37
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Yepp YP-55 and is the answer not in the manual?