Advertisement
Quick Links
S etup Guide for WS-24V Controller
1. Acceleration
Settings range = level 1 to level 20, the greater the level, the greater the acceleration.
2. Deceleration
Settings range = level 1 to level 50, the greater the value, the greater the deceleration.
3. Radial acceleration
Settings range = level 1 to level 10, the greater the value, the greater the radial acceleration.
4. Radial deceleration
Settings range = level 1 to level 10, the greater the value, the greater the radial deceleration.
WS-24 Controller
Page 1
Advertisement
Summary of Contents for EasyFold WS-24V
- Page 1 S etup Guide for WS-24V Controller 1. Acceleration Settings range = level 1 to level 20, the greater the level, the greater the acceleration. 2. Deceleration Settings range = level 1 to level 50, the greater the value, the greater the deceleration.
- Page 2 5. Threshold for low-voltage protection Settings range = level 1 to level 5. For a device operated at 24V, when you set the threshold to level 3, the threshold is 21V. Each interval between levels is 2V. The greater the level, the greater the threshold.
- Page 3 16. Adjust the speed deviation of right motor Setting range = 0 - 20, 0 = ground state, progressively slow down from level 1 to level 20. 17. Electromagnetic brake release time delay settings Setting range = 0 – 4. Level 0 = delay 0.5s. Increase a level, the delay time will be increased by 0.5s.
- Page 4 8. To change a “Setting” number or a “Value” number, press the Up and Down arrows. 9. Confirm any changes you make by pressing the “Confirm” button. 10. Power Joystick Off when you’ve completed making changes, and want to test the changes that were made.