Managing Programmes; Automatically Setting Up Programme; Manually Setting Up Programme - LG 22LV2500 Owner's Manual

18
WATCHING TV

Managing programmes

Automatically setting up pro-
gramme
Use this to automatically find and store all avail -
able programmes.
When you start auto programming, all previously
stored service information will be deleted.
1
Press Home to access the main menus.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
Auto Tuning and press OK.
4
. Press the Navigation buttons to scroll to
Antenna and press OK.
5
Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE

If the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.

You can store up to 1,000 programmes. The
number of programmes that you can store
differs depending on the broadcasting signal
environment.
The following values are needed in order to
search all available programmes quickly and
correctly.
The commonly used values are provided as
"default".
However, for correct settings, please inquire
of the cable service provider.
When running Auto Tuning in DVB cable
mode, selecting Full will search through all
frequencies to find available channels.
In the case when the programme is not
searched by selecting the Default, perform the
searching by selecting the Full.
However, in the case when the programme is
searched by selecting the Full, the Auto Tun-
ing time can be taken too much.
• Frequency : Enter a user-defined fre-
quency.
• Symbol rate : Enter a user-defined symbol
rate (Symbol rate: Speed at which a
device such as modem sends symbols to
a channel).
• Modulation : Enter a user-defined modula-
tion. (Modulation: Loading of audio or
video signals onto carrier).
• Network ID : Unique identifier allocated for
each user.
• Start Frequency : Enter a user-defined
start frequency range.
• End Frequency : Enter a user-defined end
frequency range.
Manually setting up programme (In
digital mode)
Manual Tuning lets you manually add a pro-
gramme to your programme list.
Selecting Antenna,
1 Press Home to access the main menus.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
Manual Tuning and press OK.
4
Press the Navigation buttons to scroll to DTV
and press OK.
5
Scroll through the programme types, and then
add or delete programmes.
6
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
If the TV scans a blocked programme, you

will be prompted to enter your password to
keep the programme scanned.