Download Print this page

Fleece FPE-CRR-20-0806 Installation Instructions Manual

2007.5 – 2018 6.7l dodge cummins regulated return fuel distribution block

Advertisement

Quick Links

SUBJECT:
CUMMINS REGULATED RETURN FUEL DISTRIBUTION BLOCK
FITMENT:
2007.5 – 2018 6.7L Dodge Cummins
KIT P/N:
FPE-CRR-20-0806
ESTIMATED INSTALLATION TIME: 1.5 Hours
KIT CONTENTS:
Item
Description
1
Fuel Distribution Block with Integrated
20PSI Regulated Return
2
½" Push Lock CP3 Feed Fittings
3
-6AN to M12 Fittings
4
-6AN 120° to Push Lock Fitting
5
-6AN 90° to Push Lock Fittings
6
-6AN 45° to Push Lock Fitting
7
-6AN Straight to Push Lock Fitting
8
-8AN Straight to Push Lock Fitting
9
-8AN 90° to Push Lock Fittings
10
-8AN 45° to Push Lock Fitting
11
-6 to 9/16"-18 Straight Male Fittings
12
-8 to 3/4"-16 Straight Male Fittings
13
-6AN (3/8") Push Lock Hose
14
-8AN (1/2") Push Lock Hose
15
0 - 60 PSI Stainless Steel-Case Liquid-Filled
Gauge with 1 ½" dial
16
M8x1.25 x 55mm Stainless Steel Socket
Head Cap Screws
17
12mm Sealing Washers
18
1/8" NPT Hex Socket Plugs
19
¾"-16 Hex Socket Plug w/ O-ring
CAUTIONS:
VERIFY THAT YOUR FUEL PUMP/LIFT PUMP CAN OPERATE AT 20+ PSI CONTINUOUSLY OR DAMAGE MAY OCCUR!
DO NOT USE THE FACTORY RETURN LINE TO RETURN FUEL TO THE TANK. IT IS TOO RESTRICTIVE.
USE TEFLON TAPE OR ANTISIEZE ON THREADS WHEN INSTALLING A GAUGE IN THE 1/8" NPT PORT(S)
WARNINGS:
Use of this product may void or nullify the vehicle's factory warranty.
User assumes sole responsibility for the safe & proper use of the vehicle at all times.
The purchaser and end user releases, indemnifies, discharges, and holds harmless Fleece Performance Engineering, Inc.
from any and all claims, damages, causes of action, injuries, or expenses resulting from or relating to the use or installation
of this product that is in violation of the terms and conditions on this page, the product disclaimer, and/or the product
installation instructions. Fleece Performance Engineering, Inc. will not be liable for any direct, indirect, consequential,
exemplary, punitive, statutory, or incidental damages or fines cause by the use or installation of this product.
P/N
Qty
FPE-34123
1
FPE-CP3-FEED
2
FPE-306-06-M12DBK
4
FPE-436-12006DBLK
1
FPE-436-9006DBLK
6
FPE-436-4506DBLK
1
FPE-436-0106DBLK
1
FPE-436-0108DBLK
1
FPE-436-9008DBLK
1
FPE-436-4508DBLK
2
FPE-AN920-06DBK
5
FPE-AN920-08DBK
4
FPE-436-06BLK-6.0
6 ft
FPE-436-08BK-4.0
4 ft
ASH-BY10YPE8CW
1
MMC-91292A156
2
FPE-DW-12
2
FPE-AN932-02DBK
3
FPE-814-08SDBK
1
FPE-2018-15
October, 2018
Page 1 of 3

Advertisement

loading

Summary of Contents for Fleece FPE-CRR-20-0806

  • Page 1 User assumes sole responsibility for the safe & proper use of the vehicle at all times.  The purchaser and end user releases, indemnifies, discharges, and holds harmless Fleece Performance Engineering, Inc. from any and all claims, damages, causes of action, injuries, or expenses resulting from or relating to the use or installation of this product that is in violation of the terms and conditions on this page, the product disclaimer, and/or the product installation instructions.
  • Page 2 October, 2018 CP3 Low Pressure Feed Page 2 of 3 Head/Injector Return CP3 Return Rail Return – Applicable only with regulated return distribution block Visit https://fleeceperformance.com/resources for the latest instructions and videos. For Technical Assistance contact Fleece Performance Engineering at 855-839-5040.
  • Page 3 Male Fittings (item 12) -8 to 3/4”-16 Straight Male Fittings (item 12) 1/8” NPT Plugs (item 18), Pressure Gauge (item 15), WIF or other sensors Visit https://fleeceperformance.com/resources for the latest instructions and videos. For Technical Assistance contact Fleece Performance Engineering at 855-839-5040.