Advertisement
SAFETY AND INSTALLATION TIPS
Do not attempt to open the unit with the power adaptor plug connected to avoid any
risk of personal injury.
When installing CCTV camera, always follow manufacturer's advice when using
power tools, steps, ladders, etc. and wear suitable protective equipment(e.g. safety
goggles) when drilling holes. Before drilling holes through a ceiling check for hidden
electricity cables and water pipes. The use of a cable/pipe detector is advisable.
When installing the wireless cameras on an external wall, pass the power cable
through the wall as close as possible to the camera to prevent/reduce the chances of
the cables being tampered with. After drilling any hole though an external wall for
cable, ensure the hole is sealed up around the cable using a sealant to prevent drafts.
To prevent a fire or electrical shock hazard, do not attempt to open the housing while
the unit is exposed to rain, water or wet conditions. There are no user serviceable
parts inside. Refer servicing to qualified service personnel.
DEVICE OPERATING RANGE
The wireless camera is capable of transmitting up to 100m in open field conditions.
However, when installed around your property, any solid objects (e.g. walls, ceiling,
reinforced PVC doors, etc.)
3
Advertisement
