Jessberger JP-05 Operating Instructions

Operating Instructions

Stainless Steel Barrel Hand-Pump JP-05
Safety Regulations
 Observe all warnings and safety regulations.
When filling flammable liquids, be sure to comply with the "Technical
Regulations for Flammable Liquids" and safety tips from the reagent
manufacturer (safety specifications sheet).
 When filling dangerous liquids, you absolutely must wear protective
clothing (protective glasses, gloves, apron and possibly boots).
 Every user must know the contents of these operating instructions and
have them handy at all times.
 Use the equipment within the framework of the material stability. The
pump is made of V4A steel, material 1.4571 (SS 316Ti) and PTFE.
 Only fill media emitting gases and smoking media in well ventilated
areas. Also refer to the safety tips from the reagent manufacturer (safety
specifications sheet).
 Only use the equipment in such a way that neither the operator nor other
persons are endangered.
 Never use force when operating the equipment.
Important: When filling slightly flammable liquids take precautions for
removing electrostatic charges. Use the Anti-static set (Our Art.No. 9003). Pls
see page 3.
Packaging/Contents
Please check the contents to make sure everything is included and for possible
transport damages. Point out any external, obvious damages on the packaging to
the deliver/shipper and have him confirm them in writing.
The pump consists of different pieces:
1. Hand pump with male thread 5/4" at discharge connection.
2. Discharge arc or hose connection and if necessary bonding ground set.
JESSBERGER GmbH - Jaegerweg 5 - D-85521 Ottobrunn
Tel. +49 (0) 89 - 66 66 33 400
info@jesspumpen.de
- Fax: +49 (0) 89 - 66 66 33 411
- www.jesspumpen.de
Stand: 01.10.2013