Summary of Contents for PPE Fuel Pickup Kit
- Page 1 Fuel Pickup Kit PPEdiesel.com Fuel Pickup Kit GM 6.6L Duramax 2006-2008 (113052000) Installation Guide Technical Support (714) 985-4825 Rev: 06/08/18 | v7A...
- Page 2 Fuel Pickup Kit Note: LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES THAT MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR HIGHWAY OR OFF- ROAD USE. CAUTION: Installation of this kit should only be performed by persons knowledgeable in the repair and modification of high performance automotive fuel systems.
- Page 3 Fuel Pickup Kit Installation for Fuel Pickup Kit 1. Remove drive shaft to allow for easy access to fuel tank 2. Remove tank straps (Use a jack to hold fuel tank in place) 3. Remove clamp from fuel hose...
- Page 4 Fuel Pickup Kit 4. Disconnect return and fill lines with fuel line disconnect tool (Caution: Fuel will leak from the lines!) 5. Lower fuel tank to allow for easy access to sending unit (No Image) 6. Disconnect sending unit sensor plug 7.
- Page 5 Fuel Pickup Kit 8. Remove sending unit base bracket 9. Remove sending unit from fuel tank (Be sure to drain all fuel)
- Page 6 Fuel Pickup Kit 10. Remove sending unit level 11. Remove sending unit base cover 12. Remove spring from sending unit base...
- Page 7 Fuel Pickup Kit 13. Cut the larger plastic corrugated hose 14. Unclip grey fuel pickup from sending unit and remove...
- Page 8 Fuel Pickup Kit 15. Lubricate 5/8” fuel line (11 5/8”) and insert billet aluminum fuel pickup nozzle 16. Slide assembled 5/8” x 11 5/8” fuel line and billet aluminum fuel pickup into sending unit and clip fuel pickup into place (Note: Do not tighten clamp) 17.
- Page 9 Fuel Pickup Kit 18. Extend adjustable sending unit to greater than 13” and lower unit into fuel tank 19. Adjust sending unit length to appropriate fuel sensor level and tighten fuel pickup line hose clamp 20. Reassemble sending unit into fuel tank...
- Page 10 Fuel Pickup Kit 18. Extend adjustable sending unit to greater than 13” and lower unit into fuel tank 19. Adjust sending unit length to appropriate fuel sensor level and tighten fuel pickup line hose clamp 20. Reassemble sending unit into fuel tank...
- Page 11 Fuel Pickup Kit NOTES:...
- Page 12 5011 Brooks St. Montclair CA 91763 PPEdiesel.com sales@ppediesel.com Phone: (714) 985-4825 Fax: (714) 985-9907...
Need help?
Do you have a question about the Fuel Pickup Kit and is the answer not in the manual?
Questions and answers