Flycker Vision-260 User Manual

Trailblazer Series
Vision-260
User Manual
Charge the remote control and Battery first,
when opening the package.
!
Important
This product includes electronic components. Please read this manual carefully before operation of
this product. Dropping it may damage the aircraft. Please, don't modify it by yourself. You can not execute
any upgrade or maintenance on the product. Contact your dealer or Flycker customer ser vice.
Legends
This version instruction applied for version number 1.2 vision-260 aircraft.
About version number cheacking method,pls consult offical Flycker service center.
Legends
Hints and tips Important
When This product is shipped, the default calibration has been done,
Please do not modify it yourself. Otherwise, we are not responsible for
warranty repair. We reserved the finally explanatory rights ! latest version
reference home page。Please visit our offcal website for the new updated
user manual and other information.
www.flycker.com
1
Aircraft instruction :
1
M2
V 1.2
1
M3
1. Motor M1-M4 power system. Part 6 will be a description of "how to mount
propellers"
2. Camera
3. 5.8 Video Downlink antenna
4 .
Video Downlink FM (Frequency Modulation) button is described in detail with reference
to Part 9.
5. Aircraft adjusting parameter micro interface
2
Remote control instruction
6
4
figure2-1 Remote control
instruction
1
11
1.Long press"turn on/off "button
3
2.Batter y level led lights Displays the batter y level
3
of the remote controller. Reference part 3
3.
Cameras/Video record button: Long
Press (three seconds) took pictures,
short press for video recording. And short
press button again to stop recording . Aircraft
can not take pictures when video recording.
4.Left control stick . Control to take-off and to land. Rotating to the left
or to the right is described in detail in reference to Part 7
5.Right-control stick . Control to fly for ward, backward, left and right, is
described in detail in reference to Part 7.
6.Return home-button. Switch to 'Off' and turn to manual operation. Switch
to "H" and enter Return Home mode. Reference Part 8.
7. GPS: When aircraft on GPS mode , it's smooth flight .ATTI: suitable for
novice S-ATTI: sensitive respond, but this is not for a novice aircraft user!
8. Handle
9.ON/OFF status indicator
10.Hanger for lanyard
11.Charge status indicator
12.Remote control Charging interface
2
1
M1
3
4
1
M4
5
) figure 1-1)
Aircraft instruction :
Batter y level led lights Displays the batter y level
3
of the remote controller and aircraft batter y charge
8
instructions.
7
9
5
10
2 3
12
Charging indicator
7
Power
.
6 HEAD
8
9
10
REAR
7
6. Front LED indicator, The Front LED lights show the orientation of the aircraft and random shipments
7.The color LED lights flashing at tail of aircraft. The information status has cross reference to flashing
status. Refer to Part 5.
5
8. TF card slot
9.compass
10.Landing gear
11. (XT60)Power input plug
Please use power adapter
if you need
Also another USB power output can be use for charging , for example:
mobile phone batter y charger and computer.
Please read this warning and rigid adherence to this instruction and
printed word on the batter y surface carefully before use the
On occasions of failure generated in violation of thesetting method,
application method and notices as stipulated in the operation
instructions, users take on this responsibility
USB Input
In cold weather, If there's no reaction when you press the ON button,
voltage3.7~5.5V
wait 10 seconds and press it again. please don't pound on the button
of the remote control
Displaying the batter y level of the remote
controller
) figure 3-2) Remote controller and aircraft battery charge instructions.
11
AIRCRAFT INSTRUCTION
。
Batter y
Charger
batter y.
.
100% Full of charged
75%
50%
25% Low batter y