Zeta ZT-CP3 Manual

ZT-CP3 Zeta Conventional Manual Call Point Range
This unique manual call point mimics the feel of breaking glass whilst offering the user the benefits and safety advantages of a
glass-free resettable operating element. Once activated a warning flag drops in to view easily identifying the call point that has
been operated .A key can the reset the unit. The call point provides an ideal solution for most conventional fire alarm systems.
It is ideal for industries that are sensitive to broken glass as well as areas that suffer from a high number of false activation s
such as; schools, shopping centres and other public places.
Dia A.
Dia B.
Step 1
Carefully attach the ReSet Call Point to the
top of the back box (Dia A.) and hinge down
to the points where the cover rests on the top
of the clip (Dia B.)
Dia D.
Step 3 - Detaching the cover from the
back box
1. Insert key into the bottom of the ReSet
cover
2. Keep the key inserted and with your hand
pull the cover towards you (Dia D.)
ReSet Call Point Surface Mounting
Back Box (Colour Matched)
(Optional)
Screw No. 8 x 1.5
(2) provided
(Surface Models only)
ReSet Key (1)
provided
Dia C.
Step 2
Firmly push down on the cover to engage with
clip. This should create a positive clicking
sound which ensures that the clip has been
correctly engaged (Dia C.)
NB: If unsure if the clip has engaged with the
back box, *IMPORTANT* release the cover
following Step 3. When back in the position
demonstrated in Dia B. repeat Step 2.
2
1
Methods of mounting
Wall Plate
Flush Installation
The call point is provided with a wall plate that is
Screw 3.5 x 3.5
designed to fit directly onto a standard UK single
(2) provided
35mm deep flush box.
(Flush Models only)
Secure the wall plate to the flush mount box with
Cover
the screws provided. Carefully attach the call
point to the top of the wall plate and hinge down
to snap securely into place.
Surface Installation
Operating
Element
NB: For security reasons the call point is
deliberately difficult to remove from the back
box once fitted. Please ensure that the call
point is installed correctly before snapping
closed.
The call point can be supplied with its own
surface mounting back box, 20mm entry holes
can be easily cut using the template provided on
each pack box. (See illustration below).
With the screws provided, fix the back box to the
wall. Carefully attach the call point to the top of
the back box, hinge down to snap securely into
place.
OPERATING ELEMENT
35 mm
A
Dimensions
87 mm 23 mm
COVER
87 mm
87 mm
BACK BOX