Advertisement
OPERATIONS
EASYCONNECTION
i.
Android - Support Android 5.0 & above (2-way with
USB cable, 1-way with WiFi)
ii.
iOS - Support 7.0 & above (1-way with WiFi)
•
Pre-pair PhoneLink
Go to smartphone's setting to connect to car
radio's Bluetooth (for audio output) and enable
USB debugging. (Please refer to the smartphone's
instruction manual on how to operate USB
debugging (Android only) & Bluetooth setting)
•
Android Mirroring via USB/ WiFi
Ensure Smartphone is downloaded with EasyCon-
nection App
from Google Play before begin
with mirroring connection.
i.
Via USB
•
Access the downloaded app and select
EasyConnection,then select Android USB and
connect the device and smartphone with USB
cable. Approve all the prompts. The device will
begin to project smartphone's display when
pairing successful.
ii.
Via WiFi
•
Ensure device is connected to smartphone via
USB cable and smartphone's hotspot; the
downloaded app should be opened. Select
EasyConnection then select Android WiFi.
Approve all the prompts. The device will begin to
project smartphone's display when pairing is
successful. The USB cable can be removed now.
•
iOS Mirroring via WiFi
Ensure device is connected to iPhone's hotspot. Go
to iPhone's Control Center, then select Screen
Mirroring. The device will begin to project iPhone's
display when pairing is successful.
CAR INFO
Select Car info at Home Page
CAR INFO
•
Fuel Level
•
Temperature
•
Battery Voltage
•
Water Level
•
Safety Belt Status
•
Trunk Status
•
Engine Oil Level
•
Wiper Liquid Level
•
Door Status
•
Engine Speed
•
Precision Speed
•
Mileage
•
Fuel Consumption
•
Radar Function -
Front & rear radar simulation view will appear
when vehicle is in Park mode. Some vehicles may
install a 360° panoramic camera. The reversing
path can be turned o in the System Setting.
Steering Wheel Control
4
Advertisement
