Advertisement
Quick Links
Advertisement
Summary of Contents for Suritel SEL SP-55
- Page 1 Vibroacoustic noise systems SEL SP-55 Operation manual...
- Page 2 SEL SP-55 vibroacoustic noise system with built-in equalizer is the tech- nical protection device from information leakage in rooms by vibroacoustic chan- nel. The system is intended to protect any speech information (confidential, Vibroacoustic generator SEL SP – 55/___ private, commerce or government information).
- Page 3 Plate The system can be turned in two modes: WORKING – acoustic and vibroacoustic noise generation mode; SETUP – noise tuning and the system settings mode. Holes for ad- justing screws The default settings: 1. Noise is disabled – in all channels; 2.
- Page 4 1. Frequency range…………………………….…………………………..….100 – 5 600 Hz Recommendations to installing SEL SP - 55 systems 2. Number of channels / noise generators: I. Placing electromagnetic vibro-transducers and acoustic radia- SEL SP-55/2……………………………………….…….…..…….………….2 / 2 tors SEL SP-55/4…………………………………….……….…..…….………….4 / 4 Recommendations: 3. Maximum integrated output power for one channel (with 4 Ohm)………………..2.5 W •...
- Page 5 For guarantee service please apply to the manufacturer: The operating manual ___ pcs* Suritel Ltd, 5 ul. Usievicha, Moscow 125319, (+7-495) 232-33-27. The optional equipment: 8.2. The devices with the traces of mechanical damage, unsealing, as 3.1 Acoustic start microphone ___ pcs* well as the devices used in a wrong way are not subject to warranty reparation.
- Page 6 3.4. Setting up the system 5.1.4. Order of maintenance works Maintenance works consist in external examination of the system’s state Settable parameters of the system: and its components. As well as checking: - noise characteristics for each channel; - on the device: fastening of cables’ connector, travel evenness and fixa- - switching the generator (from the front panel or the RC).
- Page 7 4.3. Switching the system OFF The generator’s rear panel appearance: Switching ON the generator: ● Turn the noise generation OFF («C» button or RC unit); ● Turn the power OFF using «220 V AC» switch on the rear panel of the generator («0»...
- Page 8 3.4.2. Switching the generator ON/OFF Switching the generator ON/OFF: ● Connect the generator with plugged acoustic and vibroacoustic radia- ATTENTION! Some errors with loading and generation of tors to 220 V / 50 Hz power net or, if UPS is used, to 12 V source - the «12 V OUTPUT1 –...
- Page 9 IV. Proper use III. Push «MENU/OK» button to confirm the choused channel and enter to its setup menu: 4.1. Switching the system ON Switching the generator ON: To return back to WORKING mode push «C» button ● Connect the generator with plugged acoustic and vibroacoustic radia- tors to 220 V / 50 Hz power net or, if UPS is used, to 12 V source - the «12 V DC»...
- Page 10 ∇ To turn ON the corresponding type use « », «∆» buttons confirm it with «MENU/OK» button To return back to choose next channel for set it push «C» button “wire RC is enabled” “wire RC is disabled” To return back to WORKING mode push «C» button 3.4.3.2.
Need help?
Do you have a question about the SEL SP-55 and is the answer not in the manual?
Questions and answers