Important Safety Precautions When using your American Eagle Wireless Earphones, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR EARPHONES. 2. Do not use your earphones near water. Clean using a dry or slightly moist cloth.
Introduction Thank you for purchasing your American Eagle Outfitters Wireless Earphones, item AEBTE. You can use your earphones with iPads, iPhones, iPods and many other types of smartphones and Bluetooth devices to stream music and enjoy hands-free calling. In order to get the best results when using this device, please read this manual first before using.
Page 4
A Quick Look at Your Device Power / Play / Pause / Answer Volume Up/Next Track Volume Down/Previous Track Charging Port Microphone LED Indicator Light...
Page 5
Charging Your Earphones Your earphones have a built-in, rechargeable lithium-polymer battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is only achieved after a few charging-discharging cycles. Charge the battery fully before first use. To do so, follow the steps below: 1.
Page 6
Pairing Your Earphones with a Bluetooth Device Your earphones can be paired with most Bluetooth devices including iPads, iPhones, iPod Touches, and most smartphones, laptops and tablets. In order to pair your earphones with a phone, follow the steps below: 1.
Page 7
Using Your Earphones Powering Your Earphones On and OFF 1. Press and hold the “POWER” button for 3 seconds to power on your earphones. If you have already paired your earphones to your Bluetooth device, they will automatically remain paired each time you power on your earphones.
Maintenance and Care -Before using your earphones, examine the ear cups to make sure that they are clean. Similarly, inspect any ports on your earphones to make sure that they are clear of dust and debris before charging. -Use a soft cloth or paper towel to clean earphones. Do not allow moisture to get inside the ear cups.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EC Declaration of Conformity Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment.
Page 11
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the AEBTE and is the answer not in the manual?
Questions and answers