Nikon F3 High-Eyepoint Instruction Manual page 14

- BASIC OPERATION-continued-- - -- - -- - - -·
20.
Take the picture.
Look through the viewlinder and press the shutter release button
lightly to turn on the exposure meter. The shutter speed display indicates
the shutter speed selected by the camera. As long as neither
+
2000 nor
- 8 - appears in the shutter speed display, the camera gives the correct
exposure. If either indication should appear ,adjust the aperture ring on the
lens until a desirable shutter speed is indicated. Should either indication
appear even after all possible lens apertures have been tried, then the availa-
ble light is too bright or too dim for the meter's range. Use either artificial
light to increase the subject's brightness or a neutral density filter to reduce
the amount of light reaching the film.
14
21.
Advance the film.
Stroke the film advance lever
to transport the film to the next frame
and get the camera ready for the
next shot.