Reversing The Door - LG DLE3500 series Owner's Manual

Reversing the Door

Tools Required
• Phillips screwdriver
• ar e at lade scre driver recommended for
hinge screws if they are tight or your Phillips
screwdriver is worn)
• mall at lade scre driver for liftin o t parts
WARNING
To reduce the risk of damage to the dryer,
property damage or personal injury, follow
basic precautions, including the following:
pport the door ith a stool or o that fits
•
under the door, or have an assistant support the
weight of the door.
• Avoid dropping the door.
• Unplug the dryer or turn off power at the main
circuit breaker before beginning door reversal.
• Always reverse the door BEFORE stacking the
dryer on top of the washer.
Door Reversal Instructions
The instructions here are for changing the door swing
from a right to a left side hinge. If the door has been
reversed, and it is necessary to change it back, use
care when following these instructions. Some of
the illustrations and the left/right references will be
reversed, and you will need to read the instructions
carefully.
WARNING
• Be sure to support the weight of the door before
removing the hinge screws.
1 Open the door and remove the two decorative
screws, two latch screws, and the latch on the
catch side with a screwdriver. Save these for
step 4.
2 While supporting the door, remove the 2 screws
on the door hinge. Remove the door.
3 Turn the door upside down and line up the holes
in the hinge with the holes on the opposite side
of the cabinet. Reinstall the door with the screws
removed in step 2.
WARNING
• Be sure to support the weight of the door before
installing the hinge screws.
4 Install the two decorative screws, the latch,
and two latch screws removed in step 1 on the
opposite side from which they were removed.
5 Check that the door closes properly.
INSTALLATION 15