Wired Network (Lan) Related - Samsung Q71 User Manual

Q
How can I receive a FAX in Sleep mode (Standby
Mode)?
A To receive a FAX when the computer is in Sleep
Mode (Standby Mode), the computer must be
configured as follows.
The FAX program must be configured so that it
receives FAXES automatically referring to the FAX
program manual.

Click Start > Control Panel > Hardware and
Sound.

Click on Phone and Modem Options.

In the Modem tab, select an installed modem
and click Properties.

In the Power Management tab of the Modem
Properties window, select the Wake up the
computer with this device option and click the
OK button.
(If the Power Management tab does not
appear, select Change Settings in the
General tab.)
When the modem is configured as above, and a FAX
arrives, the computer wakes up from Sleep Mode
and receives the FAX.

Wired Network (LAN) Related

Q
The <Wake On LAN> function
A1 <Wake On LAN> is a function that activates the
system from Sleep mode when a signal (such as
a ping or magic packet command) arrives over the
network (wired LAN).
Using the <Wake On LAN> Function

Click Start > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections.

Right-click on the Local Area Connection and
select Properties.

Click Configure > Power Management
tab. Select Allow this device to bring the
computer out of standby, then click OK.
Restart the system.
If the system is activated from Sleep mode when
—
there is no received signal, use the system after
disabling the <Wake On LAN> function.
When turning the power off when <Wake On
—
LAN> is disabled, the LAN LED may continue to
be lit.
Connecting a wired LAN while using a wireless
—
LAN may not activate the <Wake On LAN>
function. Set the Wireless LAN to Disable to use
the <Wake On LAN> function.
169