Table of Contents
Advertisement
The purposes of the links and switches is shown in the following table.
ITEM
SW1
RESET
JP1
Debug/Normal Link
TP10
+1.5V
TP17
+3.3V
JP4
+15V Plug
H8 Debug and
JP2
Programming Port
TP2
+1.8V 1
TP23
+1.8V 2
M1
Flash Card
PL1
JTAG Connector
JP3
JTAG enable
FS1
Fuse
6
VISTEK V6334E/D & V6334Q/D
hd/sd sdi digital audio de-multiplexer
Title
Comments
Used to reset the internal microcontroller.
Should be left with no link, for development only.
1V5 Test Point
3V3 Test Point
+15V Alternative supply plug.
For downloading the H8's Bootloader program, and
also used as a serial port for development.
1V8 Test Point from Reg U301
1V8 Test Point from Reg U309
Stores H8 Application code and Firmware for the
FPGA. Also used to store application specific data.
For development and test use only
Link 2-3 for operational use.
The main 2Amp fuse on the frame supply.
Issue 3
Advertisement
Table of Contents
