Arctic King ABDA049AS Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Instruction Manual

BEER DISPENSER

ABDA049AS

Table of Contents

Need help?

Do you have a question about the ABDA049AS and is the answer not in the manual?

Questions and answers

Summary of Contents for Arctic King ABDA049AS

Page 1 Instruction Manual BEER DISPENSER ABDA049AS...
Page 2: Beer Dispenser Safety
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. BEER DISPENSER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual for your appliance. Always read and obey all safety messages.
Page 3 Before the appliance is used, it must be properly positioned and installed as described in this manual,so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following: Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and •...
Page 4 you open the door, mind to close it as soon as possible. Every now and then check if the appliance is sufficiently ventilated (adequate air • circulation behind the appliance). For household refrigerating appliances, in normal temperature conditions, please • arrange the thermostat at the middle setting.
Page 5: Table Of Contents
TABLE OF CONTENTS Beer Dispenser Safety Important Safeguides Registration Information ____________________________________________________ 4 Help Us Help You ________________________________________________________ 3 Parts and Features _________________________________________________________ 4 Important Safety Instructions ________________________________________________ 5 Installation Instructions _____________________________________________________ 5 Before Using Your Beer Dispenser Installation of Your Beer Dispenser ___________________________________________ 6 Electrical Connection ______________________________________________________ 7 Extension Cord Reversing The Door Swing of Your Appliance...
Page 6: Parts And Features
PARTS AND FEATURES Beer Tower Mylar Washer Safety Guard Rail Drip Tray Adjustable Thermostat Regulator Gas Cylinder Gas Cylinder Holder Evaporator Reversible Door Beer Keg (Not Included) Metal Plate Metal Bracket (2) Castors with Lock (4)
Page 7: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or WARNING injury when using your Beer Dispenser, follow these basic precautions: Read all instructions before using the unit. • DANGER or WARNING: Risk of child entrapment. • Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous .
Page 8: Electrical Connection
under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Products service center. After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before •...
Page 9: Installation Instruction For Beer Dispenser
Installation Instructions for Beer Dispenser WARNING GAS CAN BE DANGEROUS WARNING: CO cylinders contain high-pressure compressed gas which can be hazardous if not handled properly. Make sure you READ and UNDERSTAND the following procedures for CO cylinders BEFORE INSTALLATION. 1. ALWAYS connect the CO cylinder to a regulator.
Page 10 Castors with Lock Installation Sketch Remove the 4 castors from one of the boxes inside the unit. Install the two castors with metal • bracket at the front designated positions of the cabinet base and the rest two castors at the rear designated positions (Four screw holes pre-supplied).
Page 11 Installation Of the Keg Coupler Insert the keg coupler provided into the locking neck of the beer • keg and turn it clockwise to lock into position, making sure the keg coupler is in the closed position. (See Figure 3) Figure 3 Installation of the CO Air Line Hose...
Page 12 Installation of CO Air Line Hose to Regulator Attach the open end of the red hose provided to the hose barb • connection on the regulator. Secure hose using steel clamp provided. • Pliers/screwdriver to tighten clamp and assure no leaks. (See Figure 7) Figure 7 Installation Of The Beer Tower...
Page 13: Spanner Faucet Wrentch
turning counterclockwise. Open the secondary shut-off valve to allow gas to flow into the keg. • Allow several minutes for the keg to properly pressurize. The regulator gauge may show a drop in • pressure while this happens. (See Figure 9) Note:Listen for a hissing sound at all connections to determine if there are any leaks.
Page 14: Operating Your Beer Dispenser
6. Disconnect the beer line and CO air line from the keg coupler. 7. Remove the beer keg and bottom metal plate. 8. Remove the keg coupler. 9. Disconnect the air line from the CO cylinder. 10. Remove the CO air line from cabinet plug 11.
Page 15: Moving Your Beer Dispenser
Long vacations: If the appliance will not be used for several months, remove all contents and • unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary. Moving Your Beer Dispenser Remove all the contents.
Page 16 Greasy glass Do not wash beer glasses together with glasses • • that have contained milk or any other fatty substance. Lipstick is a fatty substance.. Make sure it is removed from glass. Excess amount of germicides build up and leave •...
Page 17 If possible CO gas should be used as a • pressure source. Moisture in Air system. With the use of an air compressor, it is • • imperative to have a moisture trap installed in the Pre-cooler, and drained daily. This is in addition activated charcoal...
Page 18 Rubber hose will absorb and retain odors. Rubber hose will absorb and retain odors. An • • approved Vinyl tubing is best for air since it does not absorb moisture, and is not affected by oily substances. A fresh, outdoor, air line is imperative when air is •...
Page 19 washers. Replace worn washers as required. If faucet • does not open wide, worn parts or entire faucet must be replaced. Kinks, dents, or twists in coils, or direct Check for, and replace kinked, dented, or • • draw lines: obstructions in line, near, or twisted line from barrel to faucet.
Page 20 pressure, the more rapid the absorption of by the beer. This over-carbonates the beer, causing Wild Beer. Not enough pressure. Check for defective air vents. (see Flat Beer, • • Corrections #3 and 4.) No pressure. • Always turn pressure on before drawing beer. •...
Page 21: Troubleshooting Guide
service call. Try the suggestions below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE Beer Dispenser does not operate. Not plugged in. The circuit breaker tripped or blown fuse. The temperature control knob is set in “OFF” position.
Page 22: Service For Your Beer Dispenser
SERVICE FOR YOUR BEER DISPENSER We are proud of our customer service organization and the network of professional service technicians that provide service on your Beer Dispenser. With the purchase of your Beer Dispenser, you can have the confidence that if you ever need additional information or assistance, the Products Customer Service team will be here for you.
Page 23: Wiring Diagram
WIRING DIAGRAM...