Advertisement
Quick Links
INSTALLATION GUIDE
Switch System
2 Person Workstation
Size: 1600mm
Tools Required: Power screwdriver.
Special Note: No pre-drilled holes or nut inserts are provided.
Wood screws will be required to be drilled directly into underside of desk top.
www.jasonl.com.au
Need help!
Call us on
1300 527 665
Page 1 of 4
Advertisement
Summary of Contents for JasonL Switch System 2 Person Workstation
- Page 1 INSTALLATION GUIDE Switch System Need help! Call us on 2 Person Workstation 1300 527 665 Size: 1600mm Tools Required: Power screwdriver. Special Note: No pre-drilled holes or nut inserts are provided. Wood screws will be required to be drilled directly into underside of desk top.
- Page 2 INSTALLATION GUIDE Switch System Need help! Call us on 2 Person Workstation 1300 527 665 Size: 1600mm COMPONENTS Table Top x2 (1600x800mm) Leg x4 Leg Bracket x4 Beam Bracket x8 Long Beam x2 (1225mm) Short Beam x2 (1200mm) L-Bracket x10...
- Page 3 INSTALLATION GUIDE Switch System Need help! Call us on 2 Person Workstation 1300 527 665 Size: 1600mm Join Leg Brackets to each Leg using screws to secure them, as follow. Join 3 L-Bracket through each Long Beam and 2 L-Bracket through each Short Beam.
- Page 4 INSTALLATION GUIDE Switch System Need help! Call us on 2 Person Workstation 1300 527 665 Size: 1600mm 25mm Once we get the whole frame ready, ensure the worksurface is centered over the frame. If you are planning to install a divider screen, leave a 25mm gap between tables.