KERBEROS POWER USER INTERFACE..................................4 CONTROL MODULE.................................. 5 POWER MODULES..................................6 TECHNICAL PARAMETERS............................... 7 CERTIFICATION..................................8...
Page 3
KERBEROS POWER Actual versions of manuals you can find on www.solar-kerberos.com/en/downloads...
KERBEROS POWER 2. CONTROL MODULE Temperature Device Setting Button Communication of water status button on/off connector 1. The temperature is displayed and set in five discrete steps. SET mode: When pressing the SET key and holding for more than 3 seconds, the line titled Temperature blinks, repeated pressing SET increases the set temperature.
KERBEROS POWER 3. POWER MODULES Actual output of module 1. Each power module has its display to provide the user with information about its current status. When the input voltage is connected, 4 green LEDs blink, indicating that the module is OK and waiting for communication with the control board to check if the panels are able to deliver some min.
KERBEROS POWER 4. TECHNICAL PARAMETERS Electric data of one photovoltaic power module* 1 - 3 pc Number of power modules Input open circuit voltage (limits) 200 - 340 VDC MPP tracking range 185 - 320 VDC Maximum output current Maximum efficiency 99 % Typical wiring 8 x 260 Wp**...
Need help?
Do you have a question about the KERBEROS POWER 6000.B and is the answer not in the manual?
Questions and answers