Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Odys SOLO
-
Page 2: Table Of Contents
ODYS SOLO Content Important Safety Instructions................2 Front and Rear Panel Illustration ..............7 Front panel / Keyborad ................7 Rear panel connections ................8 Remote Key Function: ................9 Teletext Function Keys.................11 System Connections ..................12 How to input the CI Card ................12 Connecting to TV-Signal Input ..............12 Connecting to External AV Signal Source..........13... -
Page 3: Important Safety Instructions
ODYS SOLO 1 Important Safety Instructions Warning: To reduce the risk of electric shock, do not remove the cover or back. There are no user- serviceable parts inside. Refer servicing to qualified personnel. Warning: To prevent fire or electric shock hazard, do not expose the unit to rain or moisture. - Page 4 ODYS SOLO Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. To prevent fire or electrical shock hazard, do not expose the...
- Page 5 ODYS SOLO Tips regarding environmental protection At the end of its operating life, this product may not be disposed of by way of your normal household waste. Instead it must be delivered to a collection point for recycling electrical and electronic equipment.
- Page 6 ODYS SOLO Base Stand Assembly Instruction Place the TV with the display side down on a flat surface. Use a cloth to protect. Locate the bottom at the stand. Fix the bottom with turning the screw tightly on the stand.
- Page 7 ODYS SOLO 3. Use the four screws provided to fix the TV onto a wall mounting bracket (not included) via the four VESA standard holes on the back of the television.
-
Page 8: Front And Rear Panel Illustration
ODYS SOLO 2 Front and Rear Panel Illustration Front panel / Keyborad RC Sensor Function LED To adjust sound level Vol+/Vol- Buttons Used to changing the channels in normal CH+/CH- Buttons play Menu Button To display the OSD menü SOURCE Button... -
Page 9: Rear Panel Connections
ODYS SOLO Rear panel connections 1. CI Slot 6. HDMI 2. Analog TV / DVB-T 7. VGA / Audio In antenna connection 8. USB Port 3. YPbPr In 9. AV Video In 4. 12V DC In 10. Scart In 5. Earphone connection... -
Page 10: Remote Key Function
ODYS SOLO Remote Key Function: 1. STANDBY: Turns the TV on and into standby mode. 2. 0-9/S.Page: Pressing a number selects a channel. / In the text display menu Press S.PAGE button to display the text pages. Press to return to the previously viewed channel. - Page 11 ODYS SOLO Input the batteries into the remote control Step1 Slide the back cover up to open the battery compartment of the remote control. Step2 Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
-
Page 12: Teletext Function Keys
ODYS SOLO 3 Teletext Function Keys Teletext is an information s ystem broadcast by certain channels w hich can be consulted like a new spaper. It also offers access to subtitles for view ers w ith hearing problems or w ho are not familiar w ith the transmission language(cable netw orks, satellite channels, etc.) -
Page 13: System Connections
ODYS SOLO 4 System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the color cord when connecting audio and video cables. How to input the CI Card Insert the CAM module. -
Page 14: Connecting To External Av Signal Source
ODYS SOLO Connecting to External AV Signal Source Use the audio and video cable to connect the input jacks on the rear panel of the unit to the external AV signal source. Ensure that you observe the color cord when connecting audio and video cables. -
Page 15: Connecting To External Av Signal Source (Y/Pb/Pr)
ODYS SOLO Connecting to External AV Signal Source (Y/PB/PR) Use the audio and video cables to connect the Y/PB/PR input jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source. Press SOURCE then direction buttons to select Component mode, and then press the OK button to confirm. -
Page 16: Connecting To External Av Signal Source (Hdmi)
ODYS SOLO Connecting to External AV Signal Source (HDMI) Follow the figure below to connect an HDMI signal source to the HDMI jack on the rear panel of the unit. After connection, turn on the power of the unit and the external AV signal source and use the SOURCE and the direction buttons to select HDMI mode, and then press the OK button to confirm. -
Page 17: Connecting To Pc
ODYS SOLO Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure below to connect: Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and connect the other end to the PC. -
Page 18: Connecting A Usb Devices
ODYS SOLO Connecting a USB Devices This unit is designed with a USB port, can be connected to the USB device, see the figure below: If possible, please connect USB devices directly to the Devices USB interface. If this is not possible, use only USB extension cables not exceeding 25 cm. - Page 19 ODYS SOLO Press the◄► to select the right disk and press OK to display media files and folder list or choose Return to back to the media type selection menu. Select the media file by pressing ◄► or ▲▼, then the preview frame will pop up. Press the button OK to play the media file in full screen.
-
Page 20: Input Source Selection
ODYS SOLO 5 Input Source Selection The unit incorporates multiple video modes which can be selected via the Input button on the television or remote. Press the SOURCE button to enter Input menu. The screen will display as shown below: Use the ▲▼... -
Page 21: Tv Operation And System Setup
ODYS SOLO 6 TV operation and System Setup Installation Guide (DVB-T, ATV) This screen only appear when the TV first time turn on . You can choose language and country, auto turning programs .And after turning the screen will skip to the first DTV program. -
Page 22: Osd Settings (Main Operations)
ODYS SOLO OSD Settings (Main Operations) Press “TV menu” to open the settings. Press to select the page. Press to select the setting. 6.2.1 Channel Menu The first item of the MENU is channel menu( for TV or DTV source only). - Page 23 ODYS SOLO 2).DTV Manual tuning: You can select a DTV channel then find the programs in this channel. Pls press ◄► to select the channel , then press OK to search the programs . Bad - Normal - Good means signal intensity.
- Page 24 ODYS SOLO 4). Program edit: You can Delete ,Rename ,Move, Skip , FAV any programs. Red Key Press teletext red button , the program in cursor will delete. Delete Yellow Key Move the cursor to the program,press yellow button ,then you can use ▲▼ to move the program.
-
Page 25: Picture Menu
ODYS SOLO 6.2.2 Picture Menu The second item of the MENU is PICTURE MENU. You can adjust picture effect here, such as contrast, brightness, etc. Press ▲▼ to select the setting, press OK to adjust, press ◄► to change the setting. -
Page 26: Time Menu
ODYS SOLO 6.2.4 Time Menu The forth item of the menu is the TIME MENU You can adjust the clock, power on/off time, sleep time etc Press ▲▼ to select the setting, press OK to adjust, press ▲▼ to select the value to change, press ◄► to change the setting. -
Page 27: Option Menu
ODYS SOLO 6.2.5 Option Menu The sixth item of the MENU is the SETUP MENU. You can adjust the Menu language,. Press ▲▼ to select the setting, press OK to adjust, press ▲▼ to select the value to change, press ◄► to change the setting. -
Page 28: Epg Menu (Electronic Program Guide)
ODYS SOLO 6.2.7 EPG Menu (Electronic Program Guide). The EPG menu is used to look at what is being broadcasted on DTV or Radio channel in the day. To access the EPG menu, press the EPG button, the following menu will be displayed:... -
Page 29: Trouble Shooting
ODYS SOLO 7 Trouble Shooting Trouble phenomenon Symptom Inspection Check Picture Audio antenna position, direction Snow or connection antenna position, direction or connection Ghost electronic equipment,car/ Interference motorcycle,fluorescent light Volume(check if mute is Normal Picture activated or if the audio system... -
Page 30: Specifications
ODYS SOLO 8 Specifications Item Specification ATV/DTV Tune Frequency Range VHF: 174MHz to 230 MHz UHF: 470MHz to 862 MHz DVB-T Demodulation Demodulator COFDM OFDM Modulation 2K, 8K FFT, SFN and MFN Packet Carries 2K/8K Guard Interval 1/4, 1/8, 1/16, 1/32... - Page 31 ODYS SOLO systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.
-
Page 32: Warranty Condition
We offer a warranty on our products in accordance with the following conditions: 1. ODYS products are covered by a 24 month warranty. We will resolve damages or defects on ODYS products free of charge within 12 months of the purchase date under the following warranty conditions. - Page 33 ODYS SOLO 1. Send the product suitably packaged with carriage and insurance paid. Do not enclose any accessories with the products (no cables, CD's, memory cards, manuals, etc.), unless the AXDIA Service Centre specifies otherwise. 2. Mark the RMA number on the outside of the package in such a way that it is visible and clearly legible.